Agenda Packets - 2022/06/13 - Laserfiche WebLink

Home Browse Search

Selection of Independent Testing Lohnratoryr Assist Owner in the selection of an independent testing laboratory to perform the services identified in Exhibit B, Paragraph B2.01. 4. Pre -Construction Conference: Participate in a pre -construction conference prior to commencement of Work at the Site. 5. Electronic Transmittal Protocols: If the Construction Contract Documents do not specify protocols for the transmittal of Project -related correspondence, documents, text, data, drawings, information, and graphics, in electronic media or digital format, either directly, or through access to a secure Project website, then together with Owner and Contractor jointly develop such protocols for transmittals between and among Owner, Contractor, and Engineer during the Construction Phase and Post -Construction Phase. 6. Original Documents: If requested by Owner to do so, maintain and safeguard during the Construction Phase at least one original printed record version of the Construction Contract Documents, including Drawings and Specifications signed and sealed by Engineer and other design professionals in accordance with applicable Laws and Regulations. Throughout the Construction Phase, make such original printed record version of the Construction Contract Documents available to Contractor and Owner for review. 7. Schedules: Receive, review, and determine the acceptability of any and all schedules that Contractor is required to submit to Engineer, including the Progress Schedule, Schedule of Submittals, and Schedule of Values. 8. Baselines and Benchmarks: As appropriate, establish baselines and benchmarks for locating the Work which in Engineer's judgment are necessary to enable Contractor to proceed. 9. Visits to Site and Observation of Construction: In connection with observations of Contractor's Work while it is in progress: a. Make visits to the Site at intervals appropriate to the various stages of construction, as Engineer deems necessary, to observe as an experienced and qualified design professional the progress of Contractor's executed Work. Such visits and observations by Engineer, and the RPR, if any, are not intended to be exhaustive or to extend to every aspect of the Work or to involve detailed inspections of the Work beyond the responsibilities specifically assigned to Engineer in this Agreement and the Construction Contract Documents, but rather are to be limited to spot checking, selective sampling, and similar methods of general observation of the Work based on Engineer's exercise of professional judgment, as assisted by the RPR, if any. Based on information obtained during such visits and observations, Engineer will determine in general if the Work is proceeding in accordance with the Construction Contract Documents, and Engineer shall keep Owner informed of the progress of the Work. For scoping purposes, it is assumed that the RPR will provide an average of 4 hours of on -site observation time per week for the duration of the project. b. Inspection services during the reconditioning of the interiors of the two existing reaction vessels and two existing pressure filter tank at WTP No. l will be completed by KLM Engineering, Inc. The scope of work as defined by KLM Engineering, Inc. includes: 1) KLM will perform the following Scope of Work: a) Monitor and approve surface preparation. b) Monitor coating materials to ensure they meet the specification. c) Record DFTs of each coating application. Amendment No. 3 to Agreement Between Owner and Engineer for Professional Services Page 2