Laserfiche WebLink
Res 1148-22 <br />Page 3 of 5 <br />No sign may be of such intensity or brilliance that it interferes with <br />the effectiveness of an official traffic sign, device or signal. <br />4. The person owning or controlling a sign with a dynamic display <br />shall adjust the sign to meet the brightness standards according to <br />the city's instructions. The sign owner or operator shall adjust the <br />sign within one hour or as soon as reasonably possible upon notice <br />of non-compliance from the city. <br />5. All dynamic display signs installed after 12-31-2008 shall be <br />equipped and operated with an ambient light monitor or a <br />mechanism that automatically adjusts the brightness level of the <br />sign in response to light conditions. These signs also shall be <br />equipped with a means to turn off immediately the display or <br />lighting if the sign malfunctions, and the sign owner or operator <br />must turn off the sign or lighting within one hour or as soon as <br />reasonably possible after the city notifies the owner or operator <br />that the sign is not meeting the standards of this chapter. <br />6. Subsequent to 11-01-2011, no dynamic display sign shall have the <br />capacity to operate in excess of 7,500 Nits (candelas per square <br />meter). The lamp wattage and luminance level in Nits (candelas <br />per square meter) shall be provided at the time of permit <br />application. Dynamic display sign permit applications must also <br />include a certification from the owner or operator of the sign <br />stating that the sign shall at all times be operated in accordance <br />with city codes. <br />7. In addition to the brightness standards required above, dynamic <br />display signs shall meet the city's lighting requirements as listed in <br />160.031 of this code of ordinances. <br />(3) In addition to all other standards of this chapter, the city allows on -site dynamic <br />display signs subject to the following additional conditions. <br />(a) Such signs may be located only in the Limited Business (B-2), Highway <br />Business (B-3), Regional Business (B-4), of Commercial Planned Unit <br />Developments (PUDs), or (1-1) Industrial zoning districts. <br />(b) Notwithstanding division (H)(3)(a) above, the signs may be located on the <br />sites of schools, churches, places of worship or other institutional land <br />uses, subject to the following additional conditions: <br />1. City Council approval of a conditional use permit (CUP) as <br />outlined in §§ 160.088 and 160.452 of this chapter; and <br />