Agenda Packets - 2023/04/03 - Laserfiche WebLink

Home Browse Search

County Road X Right of Way _ ` 3 fft — — ` — — _ — ` — Sight Triarrgre" 1 I I� I •.I I Sign is set back I I 15 feet from I Sign cannot be bath front and I located within I IT p side property lines I sight triangle. f r Business a Property I C I � The sight Ifiangle is formed by cOnnecting the Iwo end "ints of 3t}-root Ines extending in both directions from the interseGion of twe property lines abutting a street or highway. (3) The owner, lessee or occupant of the land on which the ground sign is located and the owner of the sign shall keep the property on which the sign is located free of long grass, weeds or other rank growth, rubbish or debris. (4) All parts of ground signs shall be designed for wind pressure of not less than 30 pounds per square foot, and ground signs of wood construction shall have all members which extend into the ground protected from decay by treatment with a preservative approved by the Building Inspector. (5) No permit shall be granted for the location of any ground sign having a sign area of more than 40 square feet within 100 feet of any single-family residence. (6) Notwithstanding the provisions of division (F) below, no more than one pole or pylon sign shall be allowed per lot. However, the ground sign area allowance may be divided between one pole or pylon sign and a monument sign or between multiple monument signs, subject to the requirements herein; provided that, one or more of the following conditions are applicable: (a) The lot abuts multiple street rights -of -way, in which case a sign may be located along each frontage; (b) There are multiple curb cuts or driveways accessing the property, in which case a sign may be located near each access point or driveway; provided, the signs are separated by no less than 200 feet; (c) The width of the lot, as measured along its longest street frontage, exceeds 250 feet, in which case multiple signs may be located along the long frontage; provided, the signs are separated by no less than 200 feet; and (d) The property or properties are within an approved planned unit development (PUD). (7) Ground signs must include masonry construction materials such as stone, brick or stucco. (B) Wall signs. The following standards shall be maintained for all wall signs. (1) No wall sign shall have a projection over a private sidewalk or an established building line of more than 12 inches. (2) The wall sign area allowances as indicated in §161.035(B) of this chapter for B-2, B-3, B-4 and 1-1 Zoning Districts are per building occupant. (3) The wall sign area allowances as indicated in §161.035(B) of this chapter for the R-3, R-4, PF and CRP Zoning Districts are per building. (4) In the B-1 Zoning District, the area allowance, as indicated in §161.035(B) of this chapter, reflects the combined area for all wall, ground and projection signage on that lot. (C) Projection signs. The following standards shall be maintained for all projection signs. (1) All portions of projection signs shall be designed for a wind pressure of not less than 30 pounds per square foot. (2) Such signs shall not project over public street right-of-way but may project over private sidewalks. No such sign shall be less than 12 feet above the level of the sidewalk; except that, the signs which do not exceed four square feet and which do not project more than two feet over the sidewalk may be eight feet or more above the sidewalk. No projection sign shall project more than eight feet over any private sidewalk.