Laserfiche WebLink
42.06 <br />C i 42.07 NECESSARY DATA FOR PRELIMINARY PLAT. The preliminary <br />plat or surveyor's certificate of the proposed subdivision shall <br />contain or have attached thereto the following information: <br />Subdivision I. Identification and Description. <br />(1) Proposed name of subdivision. <br />(2 Legal description of property. P/wA1 <br />Names and addresses of thl,2go r, subdivider, surveyor, <br />engineer and designer of the Plat- <br />(4) Graphic scale not less than one (1) inch to fifty (50) <br />feet. Plat of ten acres or larger may be drawn at .a <br />scale not less than one (1) inch to one hundred (100) <br />feet. <br />��._.. <br />,5ia�1 Llt p;,ia. <br />(6) Date of preparation and of any revisions. <br />subdivision 2. EzlsCluy l:i, llt11t1 W+o •+.+.� .`%`+LJLW�. <br />(1) Boundary line survey, including measured distances and <br />angles which shall be tied to the nearest 1/4 corner or <br />section corner. <br />r (2) .Existing zoning classifications for .land in and <br />abutting the subdivision. <br />(3) Total acreage of plat and square feet of lots. ��l� <br />( Location, right-of-way width, and names of existing or Cr)l wip 0°� <br />platted streets, other public ways and public / 1"5� <br />easements, structures within the preliminary plat and ' fie <br />adjacent thereto shall also be indicated. <br />(5) Location and size of existing sewers, water mains, <br />culverts or other underground facilities within the <br />preliminary plat area and to a distance of one hundre-1 <br />(100) feet beyond. <br />(6) Boundary_LLnes_pf adjoining tand, within one hundred <br />(100) feet, including all contiguous .Land owned or <br />controlled by the subdivider. <br />(7) If requested, topographic data, including contours at <br />vertical intervals of not more than two (2) feet, <br />except where the horizontal contour interval is LOO <br />feet or more, a one (1) foot vertical interva: shall be <br />shown. Water courses, marshes, wooded areas, and othur <br />significant features shall also be shown. U.S.0.S. <br />datum shall be used for all topographic. mapping. <br />