Laserfiche WebLink
160.056(B)(2)(c) – Minimum Lot Area <br />District/Type of Lot Minimum Lot Size <br />(in square feet) <br />Minimum Lot Area Per Dwelling <br />Unit (in square feet) <br />R-1, Interior Single-Family Detached 11,000 11,000 (no more than 1 unit per lot <br />regardless of lot size) <br />R-1, Corner Lot Single-Family <br />Detached <br />12,500 12,500 (no more than 1 unit per lot <br />regardless of lot size) <br />R-1, R-2, R-3, R-4, R-5, non- <br />residential uses listed as conditional <br />uses, except for governmental and <br />public utility buildings and structures <br />necessary for the health, safety and <br />general welfare of the community <br />43,560 (1 acre) <br />R-2, Single-Family Detached; Two- <br />Family Attached Dwellings <br />12,500 • 12,500 for single-family detached <br />dwellings (no more than one unit per lot <br />regardless of lot size) <br />• 6,250 for each unit in a two-family <br />dwelling (no more than two units per lot <br />regardless of lot size <br />R-3, R-4 Single-Family Detached; <br />Two-Family Attached; Townhouses; <br />Condominiums; Planned Unit <br />Developments; Multiple Family <br /> • Single-family detached: 11,000 <br />• Two-family: 6,250 <br />• Townhouse: 6,500 <br />• Multiple family: 2,500 <br />I-1 43,560 (1 acre) <br />B-1, B-2, B-3, B-4 No minimum; must <br />allow for setbacks <br />and parking <br />requirements to be <br />met <br /> <br /> <br />160.056(C) – Height Limitations <br />(1) R-1, R-2, R-3 and R-5 Districts: no building or structure shall have a height greater than two <br />and one-half stories or 45 feet. <br />(2) R-4 District: no building or structure shall have a height greater than three stories. <br />(3) B-1, B-2, B-3, B-4, I-1 Districts: no building or structure shall have a height greater than <br />three stories. <br />*Note there are exceptions to height restrictions for chimneys, flagpoles, church spires, TV/radio <br />antennas, etc. <br />160.316 – PUD General Requirements and Standards <br />(F) Density. The exact density allowable shall be determined by standards agreed upon between <br />the applicant and the city.