Ordinance 1054 - 2026/02/09 - Laserfiche WebLink

Home Browse Search

ORDINANCE NO. 1054 PAGE 3 § 160.284 STANDARDS. For development of properties within the County Road 10 Overlay District, the following standards will be applied where these standards supersede requirements set forth in the B-1 (Neighborhood Business), B-2 (Limited Business), B-3 (Highway Business), B-4 (Regional Business). PUD (Planned Unit Development), R-3 (Medium Density Residential) and R-4 (High Density Residential) zoning districts. All other standards and requirements of the above - mentioned zoning districts shall continue to apply. (A) Construction materials. (1) At least 50% of all exterior wall finishes on any building will be comprised of a combination of at least two of the following materials: (a) Brick; (b) Natural stone or cultured stone; (c) Glass; (d) Masonry stucco; and (e) Other comparable or superior material as approved by the city. (2) The remaining 50% of all exterior wall finishes must be comprised of any combination of decorative or rock face concrete block, concrete panels, metal or wood. All building materials subject to approval of the city. (3) Buildings may be constructed of primarily one of the materials listed in division (A)(1) above, if the design exceeds the intent of the ordinance and is approved by the city. (4) Non -decorative exposed concrete block buildings are prohibited, as are pre-engineered metal buildings, corrugated metal -sided buildings and wood sided buildings unless such metal buildings and wood sided buildings are enhanced on all elevations by the application of brick, decorative masonry or decorative stucco surfaces in combination with decorative fascia overhangs and trim. (B) Architectural design. Each building design will be reviewed for at least the following considerations: (1) Appropriate location of structures on the site considering the relationship to other site amenities, restrictions, adjacent land usage and the like; (2) General layout, roof treatments, proportion and quality of exterior; (3) In the design of buildings or clusters of buildings, developers must orient projects so that the side(s) facing County Road 10 from the front of the project. Where front toward County Road 10 is not feasible due to the location of access roads and other site constraints, the project must be oriented and designed in such a manner so as to convey a pleasing appearance from County Road 10;