Laserfiche WebLink
rvlil..ltvrLU.1 1 1 1 <br /> Tri-Sector Rooftop Frame 3-Leg Tri-Sector Rooftop Frame 92 <br /> for Anchored Installation with Climbin g Ladder & Platform — <br /> • The Tri-Sector Rooftop Frames enable installation of up for Anchored Installation <br /> to twelve panel antennas for three sectors on one rooftop. Three Leg Rooftop Frame provides mounting locations for <br /> three-leg structure.The Frames,available in six heights up to twelve 2-7/8"(73 mm)OD mounting pipes_The <br /> from TO.524 m) to 30'(9.144 m),are secured to the Frame 1s designed to support up to forty-eight 2'(610 mm) <br /> roof using separately ordered Anchor Bolt Kits,below. diameter shielded antenna Design loading.per TlA/ . <br /> Frame members,with lengths of 10'(3.048 m)or less. EIA222E is for 100 mph (161km/hr)basic wind speed, <br /> are easily transported to the roof by elevator. I/2" (13mm) radial ice and a roof elevation of 100' <br /> Antenna separation with four antennas on a sector is 4' (30.48m)above grade line. <br /> (1.219 m).with an outside-antenna separation of 12' The Frame is secured to the roof using separately ordered <br /> (3.658 m). When mounting three antennas per sector,an Anchor Bolt Kits(p. 22.08). Frame members,with <br /> alternate center-antenna location provides for a 6' lengths of 10'(3.048 m)or less.can be transported to the <br /> (1.829 m)antenna separation. roof by elevator. An inside climbing ladder and a platform <br /> Wireless panel antennas mount to the Frames on sepa- with access hatch is included <br /> rately ordered 2-38"(60 mm)OD Antenna-Mounting Antennas mount to the frame on separately ordered <br /> Pipes(p. 22.04)available in five lengths from 4'(1.219 m) 2.78" (73 mm)OD Antenna-Mounting-Pipes(p. 22.04) <br /> to 11'(3.353 m). Pipe lengths are selected to match the available in three lengths foml 5'6' (1.676 m)to 8'4" <br /> antenna length and the required mounting height above (2.540 m). Pipe lengths are detennined by the number <br /> the roof. and size of antennas per mount. <br /> Tn-Sector Rooftop Frames are designed to support twelve <br /> 1'(305 mm)wide by 8' (2.438 m)tall panel antennas. <br /> j� Design loading, per TIA/EIA 222-F, is for 100 mph(161 lz 13 osa m, <br /> �1 km/hr)basic wind speed. 1/2° (13 mm)of radial ice and ;�;;:`' a <br /> � 2.78'(]3mm)00 <br /> a roof elevation of 100'(30.48 m)above grade line. 4'(1 219 ml �Anlenn rdvW lin8 <br /> antenna�paranon y,�0r�� <br /> sroarateir(p.22.04) <br /> 12'13 659 m) <br /> • <br /> cuts-de-antenna separation <br /> tl 829 m1 Antenna-Ntounting Z. <br /> all lanate cents• Pipes ardemd <br /> 4'11 219 Ml antenna seorat D 22 041 ( � <br /> antenna <br /> SwParation <br /> ,�.�_ ��1 _ �wl•� i 2 � i-•� .?rte <br /> ml <br /> Frame � �/ •-+�~� �=`� � � -,'T•' -•o' <br /> Hui jht � py�'r�_11 <br /> 13 (3 962 m1 Inc,!ter 091t <br /> 13'(3.962 ml Product <br /> anchor ball <br /> cenler to-eenler '�--� Number Description <br /> 92192 shown 82411 15'3-LeF Rooftop Frame <br /> Product 02412 20'3-US Rooftop Frame <br /> Number OcKri tion 92413 23'31eg IG ivp Frame <br /> 92101 T(t 524 m) 92414 30'3-Leg rw hop Frame <br /> 92102 10'Moia m) <br /> 92103 15*(4 572 m) <br /> 92104 20'(6 096 m) <br /> 92103 25'(7.620 m) <br /> 92106 30'(9 144 m) <br /> Rooftop Frames-22.07 <br />