Laserfiche WebLink
, r <br /> SPECIFICATIONS <br /> HOT ROD LANCE <br /> This specification describes a hot air lance used to remove <br /> debris from saw cuts, dry moisture after water blasting and <br /> prepare surfaces for maximum sealant adhesion. This unit shall <br /> use vapor withdrawal propane and be capable of handling 100 CFM <br /> of compressed air at 120 psi. The air lance shall pass inside <br /> the burner to heat the air to a maximum of 3000 degrees F. <br /> Indicate <br /> Yes No <br /> Basic Construction: <br /> Stainless steel main burner tube with rings attached Yes <br /> to aid in cooling and to act as a guard <br /> Stainless steel piping for air and fuel lines Yes <br /> -Equipped with a carrying strap to allow operator to Yes <br /> stand in upright position during use <br /> Adjustable handle grip for added operator support Yes <br /> Controls: <br /> A one quarter turn ball valve to control burner air Yes <br /> One quarter turn ball valve to control the lance air — es <br /> Needle valve to control the fuel -velocity . Tes <br /> Quick disconnects for both air and gas connections Yes <br /> Electric push button ignitor Yes <br /> Accessories: <br /> 20 ft. air and fuel line hose assembly with quick No <br /> disconnects <br /> Optional: Wheel kit with safety guard Yes <br /> — <br /> Optional: 40 ft. air and fuel line hose assembly e� <br /> TOTAL BID• $2,460.00 <br /> Construction Materials, INC. <br /> Company <br /> 6725 Oxford Street <br /> Mpls, MN 55426 <br /> Address <br /> Owne s Signature <br />