Laserfiche WebLink
Subd. 5. Side Yards. Interior side yards must be at least 10 feet in width, except <br /> ^. where a common wall meeting fire code requirements is provided between two <br /> buildings. Side yards adjoining a street must be at least 35 feet. <br /> Subd. 6. Rear Yards. The rear yard must have a depth of at least 20 feet, or at least <br /> 25 feet if there is an alley. <br /> Subd. 7. Setbacks From Residential Districts. There must be a setback area of not <br /> less than 20 feet from any property in a residential district within which setback <br /> area parking, storage and/or loading facilities are excluded. <br /> Subd. 8. Shopping Centers. The minimum yards set forth in.this.Section .1635.05 <br /> will not apply to any lot line of a lot in a shopping center if.(i) the lot line.adjoins <br /> either another lot within the shopping center or a driveway or parking-area within <br /> the shopping center, and (ii) the Council has approved a site plan for a building to <br /> be constructed on the lot with a different setback from such lot line. In such cases, <br /> the setback approved by the Council shall apply so long as the building exists on-the <br /> lot. <br /> For purposes of this subdivision, a "shopping center" means any group of four or <br /> more retail or service establishments totaling a minimum floor area.of 75,000 <br /> square feet, on one or more contiguous tracts of land in single ownership, or in <br /> multiple ownership but subject to a reciprocal easement agreement governing <br /> • common access and parking. <br /> 1635.06 General Regulations. Property in the C District is also subject to the provisions of <br /> Section 1650. <br /> Section 1640 - LI LIGHT INDUSTRIAL DISTRICT <br /> 1640.01 Purpose. The purpose of the LI District is to designate areas for, and regulate the <br /> development of, light industry. Areas are designated as light industrial due to the <br /> proximity of high capacity roadways or rail facilities and existing development, and <br /> regulated to enhance the compatibility of light industrial uses and uses within the <br /> commercial and residential districts. <br /> 1640.02 Permitted Uses. The following uses are permitted within an LI District: <br /> (a) Automotive service and repair provided no junked autos are kept on the <br /> property. <br /> (b) Cleaning, laundering and dry cleaning facilities.. <br /> (c) Contractors offices, if equipment or materials are screened according to <br /> Subsection 1650.10. <br /> (d) Engraving and printing. <br /> 16-27 <br />