|
" - S-E R I ES' 5FA
<br /> SPECIFICATIONS ELECTRICAL SPECIFICATIONS
<br /> MINIMUM CHASSIS REQUIREMENTS 5FA 40
<br /> HI-RANGER ER5FA-48L 1,5FA-52
<br /> HI-RANGER MODEL Electrical Rated Design Voltage 345KV 345KV 345KV 345KV 5FA-40 5FA-45 5FAA8 5FA-52 Upper Boom Insulating Gap 12'3° 14'10"
<br /> 16'5" 18'9"
<br /> GVWR(Gross Vehicle 19,5000 19,5001 19,5000 19,5000 (See Note) 13.8 m) 14.5 m) (5.0 m) (5.7 m)Weight Rating) (8 775 kg) (8 775 kg) I8 775 kg) (8
<br />775 kg) Lower Boom Insulated Gap 24" 24" 24" 24"FGAWR(Front Gross 6,0000 6,000/ 6,0000 6,0000 161 cm) 161 cml (61 cm) 61 cm)
<br /> Axle Weight Rating) (2 700 kg) (2 700 kg) (2 700 kg) (2 700 kg) NOTE:Upper boom insulating gap is the actual net effective length due to overlap
<br /> RGAWR(Rear Gross 13,5000 13.5001 13,5008 13,5000 of ends of the insulator rods when leveling the platform.
<br /> Axle Weight Rating) (6075kg) 16075 kg) (6 075 kg) (6075 kg) ADDITIONAL SPECIFICATIONS
<br /> Minimum Truck Curb Weight:
<br /> PB. Front 5,0001 SAW# 5,0008 5,0008 HI-RANGER MODEL
<br /> 12 250 kg) (2 250 kg) (2 250 kg) (2 250 kg) 5FA-40 5FA45 I 5FA-48 I 5FA-52
<br /> PB, Rear 7,5001 7,5001 7,5008 7,5008 Working Height 45' 50' 53' 57'
<br /> (3 375 kg) (3 375 kg) (3 375 kg) 13 375 kg) (13.7 m) 115.2 ml (16.2 m) (17.4 m)
<br /> PBR, Front 7,0001 7,0008 7,0008 7,00(11 Weight 5.3351 5,3851 5.4341 5.4658
<br /> (3 145 kg) 13 145 kg) 13 145 kg) (3 145 kg) (2 400 kg) (2 423 kg) (2 445 kg) 12 459 kg)
<br /> PBR,Rear 5,0001 5.000# 5,0001 5.0008 Platform Capacities:
<br /> (2 250 kg) 12 250 kg),12 250 kg) (2 250) End-Mounted 7001 5751 5008 4001
<br /> 1315 kg) (259 kg) 1225 kgl 1180 kg)
<br /> MINIMUM TRUCK FRAME SECTION MODULUS......10 CU. IN.1164 cu.cm)
<br /> MINIMUM TRUCK FRAME YIELD STRENGTH.........32,000 PSI(220 480 kPa)
<br /> MINIMUM TRUCK FRAME RESISTING
<br /> BENDING MOMENT.................................................320.000 LB.-FT.(416 000 Nm)
<br /> EQUIPMENT STANDARD
<br /> BOOMS PLATFORMS
<br /> • Articulating booms offer working heights from 45' to 57' 113.7 m to • 24"x 48"161 cm x 122 cm)nominal fiberglass platform,two-man end-
<br /> 174 ml. mounted,up to 700 lb.1315 kg/platform capacity.Standard on Models
<br /> • Boom travel: lower boom 15 degrees past vertical, upper boom 144 5FA-40, 5FA-45 and 5FA-48.
<br /> degree arc. • 24" x 30" (61 cm x 76 cm)nominal fiberglass platform, one-man end-
<br /> s Bronze bushings and frictionless bearings used at pivot points. mounted,400 lb.(180 kg)platform capacity.Standard on Model 5FA-52.
<br /> • Removable covers for easy access to inside of booms for maintenance • Integrally molded platform brackets for high strength.
<br /> and service. • Bonded steps to outside for easy access.
<br /> Upper BOOR►: • Floor mat furnished.
<br /> • Rectangular fiberglass boom cross-section has greater section modulus Safety belt and ring bolts furnished.
<br /> than a round cross-section of like proportions,providing a superior,more Polyethylene platform liner.
<br /> rigid boom. HYDRAULIC SYSTEM
<br /> • Boom tapered toward the tip to reduce weight,stress concentration and • Pressure compensated,axial piston,variable displacement pump,10 GPM
<br /> deflection. 137.8 LPM/at 1000 RPM.
<br /> • Epoxy finish on booms for longer life. • 1625 psi 111 196kPa/operating pressure,standard.1200 psi(8268kPa)
<br /> • Excellent dielectric protection offered by fiberglass boom. operating pressure, optional.
<br /> • Each boom load tested prior to assembly. • Large 18-gallon 168.1 L)hydraulic tank offers better cooling(total system
<br /> Lower BOOR(: capacity 41 gallons 1155 LA
<br /> • 24" 161 cm)net fiberglass insulating insert is bonded to steel and pro 9 100-mesh (cleanable/filter installed in supply line to pump.
<br /> vide(maximum dielectric protection. 10-micron high pressure filter, with dirt indicator, installed in pump
<br /> pressure line.
<br /> • Boom support and tie downs furnished. • Visual hydraulic oil level indicator.
<br /> TURNTABLE • One revolution per minute turntable speed.
<br /> • 360-degree continuous rotation. • Hydraulic pressure test connector located in pedestal.
<br /> • Longer life 36" (91 cm)diameter turntable bearing with gear teeth on • Holding valves integral with each cylinder,holds booms and outriggers
<br /> inner race. in position.
<br /> • Heavy-duty sealed rotation gearbox with one piece forged output shaft • Pump has integral automatic engine throttle control.
<br /> and pinion for maximum reliability. • One outrigger valve and two shut-off valves installed.
<br /> • External hex shaft on gearbox for manual rotation. • Easy access to emergency interlock override, in pedestal.
<br /> PEDESTAL CONTROL SYSTEM
<br /> • Welded steel rectangular pedestal construction mounted to top of truck. • Easy, effortless one-hand operation. Hi-Ranger` "3-D" power-assist
<br /> bed or body. hydraulic control system offers total command of all motions.
<br /> • Easy to remove side panels for access to hydraulic components inside • Eliminates stiffness and provides fine metering in cold weather.
<br /> pedestal. • Self-purging control.
<br /> • A-frame outriggers bolted to pedestal and to a cross-beam under truck • Lower control valve located on turntable, rather than on boom.
<br /> frame. • Hydraulic,three spool,closed-center,four-way proportional lower control
<br /> LEVELING/LIFT SYSTEM valve. Spring-centered in neutral position.
<br /> • Positive leveling system with three aircraft-grade cables and insulator • Manual override of platform controls. Lower control will operate even
<br /> rods. Keeps platform level in any boom position. if upper control is damaged or severed.
<br /> • Large sheave at boom tip reduces tension on leveling system, increas- SAFETY GROUP
<br /> ing safety factor. • Leakage monitoring test band and connector.All control lines and op-
<br /> • Lift system offers precise upper boom compensation. tional tool lines connect to test band.
<br /> • Lift fiberglass insulator rod and cable absorbs shock, reduces tower • Interlock system prevents accidental operation of controls.
<br /> stresses and provides smoother ride. • Outrigger locks hold outriggers in retracted position,to prevent settling.
<br /> • Constant radius elbow provides uniform upper boom speed. • Outrigger interlock down limit switches, prevent tower operation until
<br /> • Upper boom cylinder location provides lightweight elbow design which lowered.
<br /> reduces weight on front axle. • Outrigger downward motion alarm,warns persons when outriggers are
<br /> being lowered.
<br /> • All units tested and certified for 69KV rating.
<br />
|