Laserfiche WebLink
Jun 03 04. 12: 06p Al Esther 952-249-0493 <br /> . .. - a 27 <br /> i 6 d <br /> Ta <br /> tA <br /> SIGN CRITERIA <br /> FOR <br /> ST. ANTHONY SHOPPING CENTER <br /> GENERAL-The Sign Criteria as set forth herein, shall govern all outdoor <br /> si.gnage to be used or displayed by -the Tenants of "ST. Anthony Shopping <br /> Center", This will- insure quality signing throughout the Center, while <br /> maintaining pleasing architectural standards and fairness to all tenants. <br /> Consideration will be given to allowing maximum flexibility of sign designs, <br /> individuality and creativity within the limits described below: <br /> Sign Criteria/Specifications-All Tenant signs must be designed, fabricated and <br /> installed to comply with the following criteria and specifications: <br /> 1. All Tenant .signs must be individtially illuminated neon channel letters <br /> with plastic translucent faces. Painted faces are not acceptable_ <br /> 2. Signs shall be limited to the wording necessary to describe the business <br /> trade name and/or logo, or logo type. Type styles will not be <br /> restricted, providing that they are legible, or within ' the size and <br /> limitations described below and meet the Lessor's approval. <br /> 3. Tenants will • be allowed one <br /> Elevations exceeding 60 Linear feet my have aesec second sign, also esubject <br /> to Lessor's approval. <br /> 4. Unless unusual circumstances warrant special permission from .the Lessor, <br /> the signs shall be limited to a single line, the 'total width of which <br /> shall not exceed 80% of the Tenant's store front- width. The minimum <br /> letter height shall be 16". The minimum stroke width shall be 3 3/8". <br /> a. Letter Channels. (Returns)-A11 letter returns shall be formed from <br /> aluminum in minimum thickness of .040 inches, Depth of <br /> channels shall be 6". All interior surfaces must have a splash coat <br /> of white for reflective purposes. Outside color will be Dupont <br /> 4296d-99 Cream. <br /> b. Letter Backs-Letter backs are to be made of aluminum of the same or <br /> greater thickness as that of the letter channels. Armorply, <br /> plymetal, foam, styrene, or any other inflammable material shall not <br /> be used under any circumstances. <br /> C. Letter Faces-All letter faces are to be pigmented Plexiglas, or <br /> equal acrylic sheets with a minimum thickness of .125 inches. <br /> d. Face Retainer-All letter faces must be attached to the letter <br /> channels using trimcap material, (1 inch) trim color gold. <br />