Laserfiche WebLink
r-Alt-AUMU-1 a 1 1 1 <br /> Tri-Sector Rooftop Frame 3-Leg Trisector Rooftop Frame <br /> for Anchored Installation with Climbing Ladder & Platform <br /> The Tri-Sector Rooftop Frames enable installation of up for Anchored Installation <br /> to twelve panel antennas for three sectors on one rooftop. Three Le Rooftop Frame provides moan 1 for <br /> three-leg structure.The Frames,available in six heights 8 p, p ling as. The <br /> g up to twelve 2-7/8'(73 mm)OD mounting pipes. The <br /> from T(1.524 m) to 30' (9.144 m),are secured to the Frame is designed to support up to forty-eight 2'(610 mm) <br /> roof using separately ordered Anchor Bolt Kits,below diameter shielded antennas Design loading, per TIN <br /> Frame members,with lengths of 10' (3.048 m)or less. EIA222F, is for 100 mph (1E1km/hr)basic wind speed, <br /> are easily transported to the roof by elevator. 1/2" (13mm) radial ice and a roof elevation of 100' <br /> Antenna separation with four antennas on a sector is 4' (30.48m)above grade line. <br /> (1.219 m). with an outside-antenna separation of 12' The Frame is secured to the roof using separately ordered <br /> (3.658 m). When mounting three antennas per sector.an Anchor Bolt Kits(p. 22.08). Frame members,with <br /> alternate center-antenna location provides for a 6' lengths of 10'(3.048 m)or less.can be trauisport.ed to the <br /> (1.829 m)antenna separation. roof by elevator.An inside climbing ladder and a platform <br /> Wireless panel antennas mount to the Frames on sepa- with access hatch is included <br /> rately ordered 2-38"(60 mm)OD Antenna-Mounting Antennas mount to the frame on separately ordered <br /> Pipes(p. 22.04)available in five lengths from 4'(1.219 m) 2-7/8" (73 mm)OD Antenna-Mounting-Pipes(p. 22.04) <br /> to 11'(3.353 m). Pipc lengths are selected to match the available in three lengths form 5' 6" (1.676 m)to 8'4" <br /> antenna length and the required mounting height above (2,540 m). Pipe lengths are determined by the number <br /> the roof. and size of antennas per mount. <br /> Tn-Sector Rooftop Frames are designed to support twelve <br /> 1' (305 mm) wide by 8' (2.438 m)tall panel antennas. <br /> Design loading. per TINEtA 222-F, is for 100 mph(161 12';3 6H m) <br /> km/hr)basic wind speed. 1/2° (13 mm)of radial ice and <br /> a roof elevation of 100'(30.48 m)above grade line. 4'(1 219 m) 2.78'(73mm)00�AntesOrd unti"e <br /> antenna saDarahon P,pas Ordered <br /> somateiy(p.22.00) <br /> i Z'(3 658 m) � <br /> Outside-ante"nJ separatitM `�✓ — <br /> 11 829 m)I Antenna-Mounting <br /> ng ' <br /> aitanate centcv- ?apes ordered <br /> 4't l 2 t9 m) antenna sew,aaon_ r separatey <br /> antenna --r'-- II ID 22.04) <br /> Scoaralwn <br /> r <br /> "~_� ��, s � /•_�•\ (4.572 m) <br /> Fram <br /> Height <br /> ►! /� ` l �-�`13 (3 962 m) <br /> arc.".m 09, --�Jf <br /> can;r:oKntrr 'I <br /> 13'(3.962 m) Product <br /> anchor ton <br /> center.to-eenter '�-�—� Number Description <br /> 92102 shown 02411 15'3-L Rooftop Frame <br /> Product 02412 20'3-Leg Rooftop Framc <br /> Number Dcscri Lion 92413 25'3-Lcs Rvvrtc p Framt <br /> 92101 Y(t 524 m) 1 02414 30'3•Leg haoftop Framt <br /> 92102 10,(3.048 m) <br /> 92103 15'(4 572 rn) <br /> 92104 20'(6 096 m) <br /> 92103 I5'(7.620 m) <br /> 92106 30'(9 144 m) <br /> Rooftop Frames-22.07 <br /> � � — <br />