CC PACKET 01271983 - Laserfiche WebLink

Home Browse Search

24. Section 9. 1 , Page S-5. The first sentence shall be changed to read: . . .engine forward, commercial type, Ford custom, Interlor and custom exterior or equivalent, four door sedan. . . . 25. Section 20.4, Page S-15. The entire paragraph shall be deleted. 26. Section 20.8, Page S-15. The second sentence shall be changed to read: This gauge shall be a four and one-half (4-1/2) inch diameter of the recal- ibrating type. 27. 'Secfion 20.9, Page S-15. The second sentence shall be changed to read: This gauge shall be four and one-half (4-1/2) inch diameter.. ., .. .vacuum of the recalibrating type. 28. Sections 20. 10 and 20. 11 , Page S-16. The second sentence shall be changed to read: The gauge shall be three (3) inch diameter recalibrating type... 29. Sections 20. 10 and 20. 11 , Page S-16. All reference to liquid silicone solu- tion shall be deleted. 30. Section 14.5, Page S-10. The second paragraph shall be deleted. 31 . Appendix B. The St. Anthony paint specification shall be changed to read: • Two (2) coats of DuPont. . . 32. Appendix B. The Columbia Heights paint specification shall be changed to read: Two (2) coats of DuPont Paint No. 7665-A Acrylic Enamel with paint.. . 33. Section 9. 1 , Page S-5. The first sentence shall be changed to read: .. .and three (3) firefighters facing forward in the back. 34. Section 2.7, Page S-2. The first sentence shall be changed to read: A single rear axle shall . . . 356. Section 2.6, Page S-2. The third sentence shall read: Proof of alignment and balancing. . . 36. Section 14:2, Page S-10. The paragraph. shall be deleted and the following added: The front preconnect hose bed is to be covered with one-eighth (1/8) Inch aluminum diamond plated doors with accordian folds. The rear hose bed shall • be covered with one-eighth ( 1/8) Inch aluminum diamond •plated doors with accordian folds to both sides. Shop drawings shall be provided prior to construction.