Laserfiche WebLink
MB-ItUrMU Antenna <br /> i <br /> 26 <br /> Tri-Sector Rooftop Frame 3-Leg Tri-Sector Rooftop Frame — <br /> for Anchored Installation with Climbing Ladder & Platform <br /> . The Tri-Sector Rooftop Frames enable installation of up for Anchored Installation <br /> to twelve panel antennas for three sectors on one rooftop, Three Leg Rooftop Frame provides mounting locations for <br /> three-leg structure.The Frames,available In six heights up to twelve 2-7/8"(73 mm)OD mounting pipes.The <br /> from 5'(1.524 m)to 30'(9.144 m),are secured to the Frame is designed to support up to forty-eight 2'(610 mm) <br /> roof using separately ordered Anchor Bolt Kits,below diameter shielded antennas. Design loading,per TIA/ <br /> Frame members,with lengths of 10'(3-048 m)or less, EW22F, is for 100 mph(161knt/hr)basic wind speed, <br /> are easily transported to the roof by elevator. 1/2"(13mm)radial ice and a roof elevation of 100'. <br /> Antenna separation with four antennas on a sector is 4' (30.48m)abovc grade line_ <br /> (1.219 m),with an outside-antenna separation of 12' The Frame is secured to the roof using separately ordered <br /> (3.658 m).When mounting three antennas per sector,an Anchor Bolt Kits(p•22.08). Frame members,with <br /> alternate center-antenna location provides for a 6' lengths of 10'(3.048 m)or less,can be transported to the <br /> (1.829 m)antenna separation. roof by elevator.An inside climbing ladder and a platform <br /> Wireless panel antennas mount to the Frames on sepa. with access hatch is included. <br /> rately ordered 2-3/8"(60 mm)OD Antenna-Mounting Antennas mount to the fra me on separately ordered <br /> Pipes(p. 22.04)available in five lengths from 4'(1.219 m) 2.7/80(73 mm)OD Antenna-Mounting-Pipes(p. 22.04) <br /> to 11'(3.353 m). Pipe lengths are selected to match the mailable in three lengths form 5'6*(1.676 m)to 8'4* <br /> antenna length and the required mounting height above (2.540 m). Pipe lengths are determined by the number <br /> the roof' and size of antennas per mmint. <br /> Tri-Sector Rooftop Frames are designed to support twelve <br /> 1'(305 mm)wide by 8' (2.438 m)tall panel antennas. <br /> Design loading,per TL41ELA 222-F,is for 100 mph(161 1213.61H In) <br /> km/hr)basic wind speed, 1/2" (13 mm)of radial ice and �I;oM>n°' 2-718"c?3maa 00 <br /> a roof elevation of 100'(30.48 m)above grade line. a'11.219 m) Antenna-~ting <br /> antenna SORMTOn Pon Ordered <br /> ��� aepar�tly l0.22.00) <br /> . wtsW-antenna s�Daatwn -�'F <br /> '(1.829 m) fff Antenna-Maunpna <br /> alk"Me eenlr- Apes oroe+ed <br /> a'(1.219 ml antenna sewa4n. \ RD+raleh <br /> antenna _ 1D.22. ) / i <br /> saw►atntn -��� _ x. _ _ <br /> • la.5T2 m) ��� ' <br /> Mt <br /> r _ <br /> 13'13.962 <br /> andm colt <br /> N <br /> 13'13.962 m) rtodum <br /> anenor butt <br /> center-to-anu• '�-.� Nataba Description <br /> 92102 Sham s2411 15'3 R00hop Frame <br /> pooduct 0241Z 20'3 R60110p Frame <br /> Number DcKfilption 62413 23'3-ts9 RoOf►0p Frame <br /> 92101 5'(J.524 m) 62414 30'3-Leg Rmfmp Frame <br /> 92102 10'(3.048 tN <br /> 92103 0'(4.572 m) <br /> 92104 20'(6.096 m) <br /> 92105 25-(7.620 m <br /> 92106 30(9.144 m) <br /> • • 1 Rooftop Frames-22.07 <br />