|
Hustler-320-and 340 Specifications
<br /> TRACTION DRIVE SYSTEM TIRES Maximum Torque
<br /> Type Standard rear tires— 13 x 6.50-6 with rib Model 320—41 ft. lbs. @ 1800 RPM •
<br /> Dual hydrostatic,closed loop system. tread.Three drive tire options: Model 340—54.7 ft. lbs. ® 1800 RPM
<br /> Pumps —regular(23 x 8.50-12)turf tread. Compression
<br /> Tandem hydrostatic pump.Variable displace- —wide(23 x 10.50-12)turf tread. Model 320—22:1
<br /> ment, axial piston type. Each pump powers —wide(23 x 10.50-12)bar tread. Model 340—22:1
<br /> one drive wheel motor.System operates on DIMENSIONS Operating RPM
<br /> 10-W-40 motor oil. Length— 100 in.(254 cm).Width—50 in. 3000 RPM(max. load),3200 RPM(no load).
<br /> Pump Drive (127 cm). Height—50.5 in.(128 cm). Starter
<br /> V belt drive from engine crankshaft with man- Weight—320— 1500 lbs.(681 kg.) 12-volt(.8 KW),gear drive.
<br /> ual clutch for easier starting. 340— 1500 lbs.(681 kg.) Starter Assist
<br /> Final Drive SEAT Glow plug system is standard. Ignition key
<br /> Direct-drive, high-torque wheel motors.One operates system.
<br /> for each wheel. Two seat options: Charging System
<br /> Filter —regular padded, backrest type with molded vinyl. 12-volt, negative ground,25 amp, belt driven
<br /> 10 micron,pressure side, replaceable spin-on —heavy-duty,adjustable suspension seat alternator.
<br /> type. with arm rests;fore,aft and backrest angle Lubrication
<br /> Ground Speed adjustments. Positive pressure with replaceable spin-on
<br /> 0-10 mph(0-16.1 kph)forward and 0-6 mph filter.Trochoid rotor-type oil pump.
<br /> SAFETY FEATURES
<br /> (0-9.7 kph)reverse, infinitely variable. Injector Pump
<br /> Steering Safety interlock system with seat switch Bosch K type mini pump.
<br /> One hand,twin-lever steeringprovides inde- connected to neutral lock and PTO switches.
<br /> P Injector Nozzle
<br /> pendent control of each of two drive wheels. Steering levers must be locked in neutral and DN 12 SD 12
<br /> Turning Radius STaO switch must be off before engine will Crankcase Capacity
<br /> True zero degree.Turns within its own length. 4.5 quarts(4.3 I)
<br /> Counter-rotating, independently powered drive CONTROLS 6 quarts(5.7 1)
<br /> wheels. Hand-operated throttle,ignition switch, PTO Air Cleaner
<br /> BRAKES clutch switch, pump clutch lever, parking Heavy-duty, remote-mounted Donaldson
<br /> Service brake lever, attachment lift lever, and auxiliary Cyclo-pac filter. Dry, replaceable filter element
<br /> Independent,dynamic braking through hydro- valve lever. Ignition switch controls solenoid- with cyclone pre-cleaner.Service indicator.
<br /> static transmissions. activated engine shutoff. Muffler
<br /> Parking INDICATORS Single, industrial-type.
<br /> Positive,automotive-type drum and shoe. Hour meter,oil pressure warning light, engine Fuel •
<br /> Hand-operated lock-over-center control lever heat warning light and alternator warning Diesel No. 2
<br /> on left side of operator.Adjustable tension. light.Audible signal for high engine tempera- Fuel Filter
<br /> FRAME ture or low engine oil pressure. Replaceable,automotive-type.
<br /> Constructed of She in.(.5 cm)welded steel MODEL 320/340 Cooling System
<br /> and 2 in.x 2 in.(5 cm x 5 cm)steel torsion ENGINE SPECIFICATIONS Forced circulation with high-capacity radiator
<br /> tubes with Ve in.and She in.(.3 cm and .5 cm) and coolant recovery system.
<br /> wall thickness. Make Governor
<br /> ATTACHMENT DRIVE Kubota Centrifugal ball mechanical type.
<br /> PTO shaft,s lined,two high-speed U-joints. Model
<br /> Specifications subject to change without notice.
<br /> 320—D950
<br /> PTO shaft speed: 3000 RPM. 340—V1200
<br /> ATTACHMENT CLUTCH Type
<br /> Electromagnetic. 320—Three cylinder,in-line,4 cycle diesel,
<br /> ATTACHMENT LIFT liquid-cooled. ` r
<br /> Hydraulic cylinder with hand lever control. 340—Four cylinder, in-line,4 cycle diesel, f
<br /> liquid-cooled.
<br /> ATTACHMENT TOOL BAR Construction
<br /> Two-point tool bar,quick disconnect type. Special high-grade cast iron cylinder block.
<br /> Constructed of 1/4 in. x 1/2 in.(.6 cm x 1.3 cm) Cross-flow cylinder head.Chrome molybde-
<br /> welded steel. num crankshaft.Three-layer aluminum alloy / '-
<br /> AUXILIARY HYDRAULICS bearings. Spherical-type combustion chamber.
<br /> Auxiliary hydraulic valve with manual control Displacement
<br /> lever and quick couplers. Model 320—56.6 cu. in.(927 cc)
<br /> Model 340—75.49 cu.in.(1237 cc)
<br /> CAPACITIES Horsepower ,
<br /> Hydraulic Oil Model 320—21.5 hp(16 KW)mfg. rating a
<br /> 320—3.3 gal.(13.3 1) 3000 RPM. j
<br /> 340—3.3 gal.(13.3 1) Model 340—28.5 hp(21.3 KW)mfg. rating With the rear-mounted, HI-Lift BAC-VAC'
<br /> Cooling a 3000 RPM. hopper,the 320 or 340 will give you a
<br /> 2.50 gal.(9.5 1)
<br /> professional finish every time.
<br /> 3.75 gal.(10.4 1)
<br /> r�
<br /> St
<br /> d Built To LastLE I�JL H
<br /> -----� i
<br /> Turf&Grounds Equipment
<br /> ".
<br /> –-::S,INC.
<br /> Excel Industries,Inc.•P.O"Box 7000•Hesston,KS 67062-2097
<br /> "_ _•i_z_='._ : z 1-800-835-3260•In Kansas,316-327-4911
<br /> C.. C:I 1:"', Form No.041020 G 1988 Excel Industries,Inc. Litho in U.S.A.
<br />
|