Laserfiche WebLink
construction,provided that the total sign surface area of all such signs do not exceed <br /> the greater of twelve (12) square feet or a ratio of one (1) square foot of sign surface <br /> per one hundred (100)square feet of floor space in the construction project,up to a <br /> maximum of thirty-two (32) square feet. Sign needs to be removed within two (2) <br /> weeks of receiving an Occupancy Permit from City <br /> Subd. 9. On-Site Temporary Subdivision Signs. Move to 1400.09 Signs Requiring <br /> Permits. Add placed at property entrance or if two (2)entrances, one sign at each entrance <br /> not larger than thirty-two square feet each sign both sides. One(1)on-site temporary sign <br /> advertising a group of lots for sale within a subdivision or group of houses for sale <br /> within a housing project, provided that the total area of such sign shall not exceed <br /> sixty-four(64) square feet with no single dimension in excess of sixteen(16) feet <br /> placed at property entrance. If there are two (2)entrances,one sign at each entrance <br /> not larger than thirty-two square feet each sign both sides. The display of such sign <br /> shall be limited to a six (6)-month time period. At the expiration of such period, the <br /> applicant may request a further extension of time; otherwise the sign must be <br /> removed. <br /> 1400.12 District Schedules; <br /> Subd. 1. Residential <br /> (2) R-3 and R-4. Each multiple dwelling complex (nine(9) or more units) allowed <br /> one freestanding sign identifying the complex. The sign may not exceed fifty(50) <br /> square feet in sign surface area. The sign structure, including the sign surface area, <br /> may not exceed one hundred-fifty(150) square feet in area. The highest point of the <br /> sign may not be more than ten(10) feet above ground level. Planning Commission <br /> recommends that this height be reduced to eight (8)feet. <br /> F:\Staff Reports\2008\032508 Sign Ordinance STAFF REPORT.doc <br />