My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
RES 19-035 APPROVING SMALL WIRELESS AESTHETIC STANDARDS
StAnthony
>
City Council
>
City Council Resolutions
>
2019
>
RES 19-035 APPROVING SMALL WIRELESS AESTHETIC STANDARDS
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
4/11/2019 9:54:11 AM
Creation date
4/11/2019 9:25:32 AM
Metadata
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
6
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
attenuates the signal transmitted/received by such antenna) or otherwise concealed to the extent <br />feasible. Cable connections, antenna mounts and other hardware must also be concealed. The <br />radome or other concealment must be non-reflective and painted or otherwise colored to match the <br />existing support structure. <br /> <br />Collocation: Collocations between wireless service providers on the same support structure <br />is required wherever feasible. If an applicant chooses to not collocate in areas where options are <br />or appear to be available, the applicant must document that collocation is infeasible. <br /> <br />Concealment: Concealment elements must be incorporated into the proposed design of the <br />small wireless facility installation, and must include approved camouflaging or shrouding <br />techniques. <br /> <br />Pole-Mounted Equipment Cages/Shrouds: When facilities are permitted to be pole- <br />mounted, facilities other than the antenna(s), electric meter and disconnect switch must be <br />concealed within an equipment shroud. The facilities must be installed at a height that presents the <br />least aesthetic impact, but in no event lower than fifteen (15’) feet above ground level. The <br />equipment shroud must be non-reflective and painted, wrapped or otherwise colored to match the <br />support structure. Shrouds must be mounted flush to the support where feasible. Standoff mounts <br />must provide the minimum separation distance from the support structure necessary for feasibility. <br /> <br />New Poles: New support structures must be the same color as neighboring, similar support <br />structures and of the same design characteristics. <br /> <br />Ground-Mounted Equipment: Ground-mounted equipment must be installed below grade <br />or, if technically necessary, concealed in a ground-mounted cabinet. In addition to any applicable <br />requirements in the City’s right-of-way ordinance, Code Section, ground mounted cabinets must: <br /> <br />1. be installed flush to the ground; <br /> <br />2. be the same color as neighboring, similar support cabinets or other ground-mounted <br />structures; <br /> <br />3. on or adjoining sidewalks, trails, or other similar passageways, not interfere in any <br />way with the flow of pedestrian, bicycle or vehicular traffic; <br /> <br />4. conform to the American’s with Disabilities Act (ADA) including with respect to <br />appropriate sidewalk spacing; and <br /> <br />5. not create a safety hazard; <br /> <br />Lights: Unless otherwise required for compliance with FAA or FCC regulations, small <br />wireless facilities shall not include any lights or lighting. This subsection does not prohibit <br />installations on streetlights or the installation of luminaires or additional street lighting on new <br />support structures if and where required by the City. <br /> <br />3 <br /> <br /> <br />
The URL can be used to link to this page
Your browser does not support the video tag.