Laserfiche WebLink
41 <br />Subd. 4. Landscaping. Ground signs must be landscaped. Landscaping may consist of <br />shrubs, plants, rocks, or other decorative materials located around the pedestal. <br />Subd. 5. Design and Location: <br />(1) Signs must maximize the use of natural materials in construction and <br />should conform to the material design of the principal structure. <br />(2) Signs must be located at least fifteen (15) feet from the curb line of any <br />public street and cannot be placed within any street right-of-way or <br />government easement. <br />(3) The pedestal width of a ground sign must be at least equal to the sign <br />width. <br />(4) The principal structure of a parcel of land will be allowed one ground sign, <br />regardless of the number of tenants in the structure. <br />1400.11 Wall Signs. The sign surface area of a wall sign may not exceed fifteen (15) percent <br />of the area of the wall to which it is applied. <br />1400.12 District Schedules. Signs shall be permitted as set forth in the following provisions: <br />Subd. 1. Residential. The following signs are permitted in a residential district: <br />(1) R-1, R-lA, and R-2. <br />a. One (1) identification sign per dwelling unit per right-of-way <br />frontage stating the street address, and/or the name of the resident. <br />One (1) address sign may also be located on the curb in front of <br />each dwelling unit or on a freestanding mailbox. <br />b. Only one (1) non-commercial sign with a maximum sign area of <br />six (6) square feet per surface with a total area of twelve (12) <br />square feet all sign area surfaces will be permitted per lot. Signs <br />may not have any surface area or structural member closer than ten <br />(10) feet to a side lot line or sited in a public right-of-way or public <br />easement. <br />C. The following types of signs are not permitted in residential zoning <br />districts: <br />Awning signs <br />ii. Balloon signs <br />iii. Canopy signs <br />iv. Flashing signs <br />