Laserfiche WebLink
SIGN CRITERIA <br />FOR <br />ST. ANTHONY SHOPPING CENTER <br />GENERAL -The Sign Criteria as set forth herein, shall govern all outdoor <br />signage to be used or displayed by the Tenants of "ST. Anthony Shopping <br />Center". This will insure quality signing throughout the Center, while <br />maintaining pleasing architectural standards and fairness to all tenants. <br />Consideration will be given to allowing maximum flexibility of sign designs, <br />individuality and creativity within the limits described below: <br />Sign Criteria/Specifications-All Tenant signs must be designed, fabricated and <br />installed to comply with the following criteria and specifications: <br />1. All Tenant signs must be individually illuminated neon channel letters <br />with plastic translucent faces. Painted faces are not acceptable.. <br />2. Signs shall be limited to the wording necessary to describe the business <br />trade name and/or logo, or logo type. Type styles will not be <br />restricted, providing that they are legible, or within the size and <br />limitations described below and meet the Lessor's approval. <br />3. Tenants will be allowed one (1) sign per storefront elevation. <br />Elevations exceeding 60 Linear feet my have a second sign, also subject <br />to Lessor's approval. <br />4. Unless <br />unusual circumstances <br />warrant special permission from the <br />Lessor, <br />the signs <br />shall be limited <br />to a single line, the total width <br />of which <br />shall <br />not exceed 80% of the <br />Tenant's store front width. The <br />minimum <br />letter <br />height shall be 16". <br />The minimum stroke width shall be 3 <br />3/8". <br />a. Letter Channels (Returns) -A1.1 letter returns shall be formed from <br />aluminum in minimum thickness of .040 inches. Depth of <br />channels shall be 6". All interior surfaces must have a splash coat <br />of white for reflective purposes. Outside color will be Dupont <br />4296d-99 Cream. <br />b. Letter Backs -Letter backs are to be made of aluminum of the same or <br />greater thickness as that of the letter channels. Armorply, <br />plymetal, foam, styrene, or any other inflammable material shall not <br />be used under any circumstances. <br />C. Letter Faces -All letter faces are to be pigmented Plexiglas, or <br />equal acrylic sheets with a minimum thickness of .125 inches. <br />d. Face Retainer -All letter faces must be attached to the letter <br />channels using trimcap material, (1 inch) trim color gold. <br />36 <br />