My WebLink
|
Help
|
About
|
Sign Out
Home
2014.03.26 Parks Packet
Hugo
>
Community Development
>
Parks
>
Parks Commission
>
Parks Commission Agenda/Packets
>
2014
>
2014.03.26 Parks Packet
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
6/23/2016 3:37:05 PM
Creation date
6/23/2016 11:36:09 AM
Metadata
Fields
Template:
Commissions
Meeting Date
3/26/2014
Document Type
Agenda/Packets
Commission Name
Parks
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
19
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
heaviest traffic occur. Because paths are separated from roads, they provide <br />many trail users (especially pedestrians, children, and average bicyclists) with a <br />safe and enjoyable way to use the trail system. The following guidelines will help <br />the City design and construct bicycle -pedestrian paths: <br />a) Provide bicycle -pedestrian paths in areas where they are most needed. <br />For example, provide paths that link residential neighborhoods to parks, <br />schools and the downtown area. <br />b) Where paths runs parallel to the road system, provide paths on both sides <br />of busy or wide roads that are difficult or unsafe to cross. <br />c) On lightly traveled, low -speed roads, provide a minimum 5 -foot separation <br />between paths and roads. Where paths are next to heavily traveled, high- <br />speed roads, consider providing a minimum 10 -foot separation between <br />paths and roads and providing berms and plantings to buffer the paths <br />from the roads. <br />d) Pave paths with bituminous or concrete. Bituminous paving is the less <br />expensive of the two and is most commonly used. In some cases, for <br />example where a path is short and is not expected to carry much traffic, a <br />compacted aggregate surface may be acceptable. <br />e) Avoid obstacles like mailboxes, signs, and power poles. <br />f) Provide a minimum 10 -foot wide path where the path is intended to <br />accommodate both pedestrians and bicyclists. <br />g) If a path is expected to be heavily used by both pedestrians and bicyclists, <br />consider providing separate paths for each user. The two uses could be <br />separated by striping, or they could be physically separated by distance. <br />The pedestrian portion of the path should be at least 5 -feet wide and the <br />bicycle portion of the trail should be at least 8 -feet wide. <br />h) Limit the number of areas that paths cross streets. Where crossings are <br />required, provide crossings in highly visible areas and where street traffic <br />can be controlled. Provide curb cuts where there are existing curbs. <br />4. Snowmobile Trails. The existing snowmobile trails in Hugo provide winter <br />recreation opportunities for many people. Washington County and the City of <br />Hugo approve snowmobile trails in Hugo. The private snowmobile clubs maintain <br />the trails with support from the Minnesota Department of Natural Resources. In <br />general, snowmobiles are allowed on the outside shoulder of county and state <br />road ditches. They are also allowed on private land with landowner permission. <br />This plan does not recommend eliminating snowmobile trails in Hugo, but the <br />City should recognize that the potential for snowmobile accidents and conflicts <br />Chapter 7 7-34 <br />Parks, Trails, & Open Spaces <br />iHugo <br />
The URL can be used to link to this page
Your browser does not support the video tag.