1993.03.01 ORD 1993-279 - Laserfiche WebLink

Home

130-6.GENERAL CONDITIONS.Each , application for a Junk Yard License or Subd.F.Oil Filter Disposal.Used oil Auto Dismantling Facility License shall filters shall be recycled,disposed posed of as pact facility is having on City's ground include following information: Hazardous Waste,or after being drained water. In determining whether to re- (1)The name and street address of ap- and tested by a professional testing labo- quire monitoring wells,Council shall: plicant; ratory,disposed of as solid waste.Oil fil- (1)Consult with a licensee,or appoint (2) The street address and legal de- ters may remain attached to engines orconsult licens- scription of premises upon which Junk motors when sold to a second party or a ee, ortoordering thatlicwith ocon- Yard or Auto Dismantling Facility is to transported as scrap,so long as receiv- prior to licensee to be operated; ing person will accept filter. (2strut a monitoring well. (3) The name, street address, and ra Consider and specific othergatop- ( o of Subd.G.Tire Storage. ographical features. of written consent of owner of premises,to (1) Tires shall be stored in cells no operation as they pertain to facilities po- use premises for purposes detailed on larger than 10,000 square feet by 10 feet tential to contaminating City's ground application. high,with a posted fire lane 50 feet wide water. (4) The zoning classification of pre- surrounding each cell and leading to a (3) Consider professional recommen- mises; public street.The applicant shall insure dation of City Engineer,or other quail- (5)date of issuance and status of spe- emergency vehicle access on said fire fled individual or firm as to necessity or cial use permit,if applicable,for use off lanes at all times of year. desirability of constructing monitoring premises for purposes detailed on the (2)Tire piles shall be located 50 feet wells at facility. application; away from any vegetation over 12 inches Subd.C. Inspections and monitoring. (6) A copy of a current Industrial in height. It shall be responsibility of City's build- Storm Water Permit for site; (3)No more than 500 waste tires shall ing inspector to conduct or coordinate (7) A copy of a current Washington be stored at any Junk Yard or Auto Dis- all inspections or monitoring activities County Hazardous Waste Generator's mantling Facility without a current per- required by this ordinance or required License for site,if necessary;and mit from Minnesota Pollution Control by any license issued pursuant to this or- (8)A Site Management Plan,as here- Agency.Tires maintained for resale as dinance. in defined. vehicle components shall be stored sepa- 130-10.REPORT OF SPILLS.It is du- 130-7. SITE MANAGEMENT PLAN. rately from waste tires. ty of every Person to notify Minnesota Each Person holding a Junk Yard or Au- Subd.H.Hazardous Material Storage. Pollution Control Agency of any spill or to Dismantling License issued by City of Flammable and hazardous materials discharge of a substance in accordance Hugo shall maintain a current Site Man- shall be stored on covered and appropri- with Minnesota Statute,Section 115.061. agement Plan on file with City Clerk.At ately marked containers suitable to con- Any Person holding a Junk Yard or Auto a minimum, Site Management Plan tents in storage. Adequate aisle space Dismantling License from City of Hugo shall include following: shall be provided for access by emer- shall also report to City of Hugo,in writ- (1)A site sketch showing general loca- gency personnel and for spill contain- ing, time, date, location, cause, and tion and dimensions of all fire lanes, ment and clean-up equipment. method of clean-up of any hazardous- buildings, storage areas of hazardous, Subd.I.Fencing.Fencing shall be in- material spill in excess of one gallon in ex --wive or flammable materials, stalled in accordance with City volume, which occurs on premises of c piles of ten or more tires,location specifications on perimeter of all Auto Licensee,within 48 hours of occurrence of fire extinguishers, and site en- Dismantling Facilities and Junk Yards of spill. trance and exit points. at least six feet highto denyP (2)A fluid managementplan describ- public e s 1shall TERM OF LICENSES.ordinance cess except through controlled access es shall be issued under this ordinance ing processing of hazardous or flamma- gates.In case where facility has a mini- for a period not to exceed two years. ble fluids, to include fluid drainage, mum of 100 feet of vacant land between 130.12. DISPLAY OF LICENSE. Ev- storage,disposal,and spill containment all dismantling facilities,and any adja- ery License shall be kept conspicuously and clean up. cent property or public road, and ab- posted about place for which it is issued, (3)A plan for storage,processing,and sence of a fence will not pose an unrea- along with telephone numbers of Minne- disposal of batteries,tires,and contami- sonable threat to public safety,Council sota Pollution Control Agency Spill Unit nated parts and components,including a may allow posting of"No Trespassing" and Hugo Fire Department. Licenses statement as to expected volume. signs at intervals no greater than 50 feet shall be exhibited to any Person upon re- (4)The location and depth of all wells around perimeter of facility in lieu of re- quest. registered with Washington County Pub- quired fence. 130.13.LICENSE FEE.The fee for ev- lic Health Department, located within Subd. J. Screening. Visual screening ery Junk Yard and Auto Dismantling 1000 feet of property lines of Junk yard shall be provided through fencing or Facility License shall be $125.00 per or Auto Dismantling Facility. landscaping to block from view all Auto year, plus actual site-inspection, sam- 130-8. GENERAL REQUIREMENTS. Dismantling,auto or junk storage,and piing, and analysis fees not to exceed On or after January 1,1994,unless soon- related activities,from adjacent proper- $6,000 annually.Such fees do not include er required by law,it shall be unlawful ty or any public right-of-way.Adequacy costs to be paid by licensee in design,su- for any Junk Yard or Auto Dismantling of screening shall be determined by City pervision, and construction of any facility located in City of Hugo to oper- Council as part of Site Management ground water monitoring wells required ate except in conformance with follow- Plan approval. as part of this license. Subd.K.Hazardous Spills.Spills of oil, 130.14.REVOCATION.EveryLicense ing provisions: Subd.A.Battery Storage.All batteries lubricants,or other hazardous material may be revoked by teh Council for viola- must be stored on a non-reactive,curbed shall be promptly contained, cleaned, tion of any provision of this Ordinance, and impermeable surface without a and disposed of in accordance with cur- after Licensee has been given reason- floor drain and protected from accumu- rent Minnesota Pollution Control Agen- able notice and opportunity to be heard, lations of rain,snow and drain water,or cy guidelines. or upon any change in zoning or special stored within a covered, non-reactive, Subd.L.On-site Disposal.On-site dis- use permit status of premises whereby impermeable container. posal of any material is prohibited, Junk Yard or Auto Dismantling Facili- Subd. B. Antifreeze Disposal. Anti- except under proper license or permit. ties are prohibited.There shall be no re- freeze shall be collected and recycled,or Subd. M. Battery Cable Disposal. fund of any License fee,inspection fee, disposed of through other Minnesota Lead battery cable ends and heater or any portion thereof upon revocation. Pollution Control Agency approved cores shall be removed from vehicles 130.15.PENALTIES.Any person who methods. Antifreeze shall not be dis- prior to crushing and shall be recycled violates any provision of this ordinance charged to land,water,any septic sys- separately,unless accepted as a vehicle shall be guilty of a misdemeanor. tem,or public sewer system. component by a second person. 130.16.EFFECTIVE DATE. This Or- Subd. C. Refrigerants. Refrigerants 130-9. INSPECTIONS AND MONI- dinance will become effective from and shall be recovered and recycled or re- TORING. after its adoption and publication. claimed by methods approved by Minne- Subd. A. Inspections by Officials. In Upon roll call,following members vot- sota Pollution Control Agency. order to insure compliance with license ing AYE: Barnes, Brunotte, Leroux, Subd. D. Recycling Petroleum Prod- or permit granted in this ordinance,and Miron ucts. Used oil, including engine oil, as a condition forr issuance of any per- ABSTAINED:Stoltzman transmission fluid, hydraulic oil, and mit or license granted under this ordi- Whereupon said ordinance was de- similar petroleum products,shall be re- nance,applicant shall allow inspections dared passed and adopted this 1st day cycled or disposed of through Minnesota at reasonable and appropriate times by of March,1993. Pollution Control Agency approved officials of City of Hugo,or such consult- /s/Walter L.Stoltzman methods. ants as City deems appropriate to re- Walter L.Stoltzman,Mayor Subd.E.Draining Fluids. talo.The license holder shall routinely ATTEST: (1) All Auto Dismantling Facilities be given a minimum of 24-hours notice /s/Mary Ann Creager and Junk Yards shall have facilities to of any scheduled inspection,but failure Mary Ann Creager,City Clerk drain fluids on a curbed, impermeable to provide such notice shall not be cause (Published in THE TIMES surface;within a structure with an im- to deny an inspection of any facility,nor March 11.1993) permeable floor; on an unbermed, im- shall it be cause to deny enforcement of permeable surface with adequate spill- any ordinance,regulation,or law. control equipment, and absorbent Subd.B.Monitoring Wells.The Coun- material immediately available to con- til may require than any licensee con- tain any spill which may occur. struct and maintain, at licensee's ex- (2)Where disassembly of any vehicle, pense,ground water monitoring wells on or component thereof,is necessary at a premises of their Junk Yard or Auto location without an impermeable floor Dismantling Facility to determine im- or surface,all drain plugs,hose connec- tions,and other orifices,which allow for leakage of fluids,shall be tightly capped prior to component movement to avoid spillage of residue liquids.