Laserfiche WebLink
City of Little Canada, MN 6 <br />Exterior and Interior Inspection <br />The exterior inspection is critical for evaluating the coating conditions to determine <br />whether the coating is a candidate for over coating or complete reconditioning. KLM <br />inspectors will also check for structural deficiencies and OSHA compliance. <br />For each inspection, KLM will provide a NACE Certified Coatings Inspector that is <br />properly trained and qualified to perfoun this type of inspection. The exterior will be <br />inspected from all areas accessible without rigging unless otherwise written into this <br />agreement. Coating conditions of both the interior and exterior will be examined using a <br />number of different testing equipment. KLM's inspection will include using ultrasonic <br />thickness readings UT, dry film thickness DFT, and standard ASTM tests. If KLM were <br />requested to take coating samples from the tanks to check for lead and chromium this <br />would be an additional fee. <br />Interior and Exterior: <br />• Roof structure (size and style) <br />• Vents (size and style) <br />• Roof manways (size and style) <br />• Ventilation manways (size and style) <br />• Overflow weir and pipe (size and style) <br />• Support column (size and style) <br />• Capacity level and head range <br />• inlet/outlet pipe <br />• Mud ring <br />• Drains <br />• Floor condition (oil canning) <br />• Cathodic protection <br />• Pitting <br />• Girders and sail plates <br />• Ladders, cages, platforms, and handrails <br />• Painters rigging <br />• Reinforcement pads <br />• Balcony or stiffening girder <br />• Anchor bolts and cotter pins <br />• Base pad condition including flexcel and grout <br />• Screens on vents and overflows <br />• Over flow air breaks, splash pads, and drainage <br />• Safety devices <br />• Lighting <br />• Site dimensions <br />• Safety considerations <br />• Antennas <br />8 <br />