Laserfiche WebLink
GULL 'ING <br />SP EC 0 P 0 ( C A T 9 O H S <br />HOUSING: A one -piece die cast aluminum <br />housing mounts directly to a pole or wall <br />without the need for a support arm. The low <br />profile rounded form generates wind loading <br />requirements of only 1.2 EPA <br />LENS ASSEMBLY: A single -piece die cast <br />aluminum lens frame hinges down from the <br />housing and is secured by a stainless steel <br />lanyard and hinge pin. • <br />An optically clear, heat and impact resistant <br />tempered flat or sag glass lens is <br />mechanically secured with eight (8) retainers. <br />The electrical and optical chambers are <br />thoroughly sealed with a one -piece memory <br />retentive hollow core EPDM gasket to prevent <br />intrusion by moisture, dust, and insects. <br />to <br />0 ME fM S 0© N s <br />OPTICAL SYSTEMS: The segmented <br />optical systems are manufactured from <br />homogenous sheet aluminum which has <br />been electrochemically brightened, <br />anodized and sealed, The multifaceted <br />arc image duplicating systems are <br />designed to produce IES Types I (1), <br />II (2XL), III (3XL), IV (4XL), and V (0). <br />With the 2XL, 3XL and 4XL luminaries, <br />the reflector facets form a conical fan <br />around the arc tube with each facet <br />positioned to be precisely tangent to the <br />top of the are tube. <br />The mogul based lampholder is glazed <br />porcelain with a nickel plated screw shell. <br />Position oriented sockets to accept super <br />metal halide lamps are supplied standard. <br />M O U N T O N G <br />All units feature lamp stabilizers except <br />150 HPS. <br />ELECTRICAL: All electrical components <br />are UL recognized, factory tested, and <br />mounted on a unitized plate with quick <br />electrical disconnects. Each high power <br />factor ballast is the separate component <br />type capable of providing reliable lamp <br />starting down to - 20 °(F). <br />FINISH: Luminaires are finished with a <br />fade and abrasion resistant, <br />electrostatically applied, thermally cured <br />TGIC powder coat. Units are thoroughly <br />cleaned and provided with a patented <br />pretreatment. <br />® ET GL 0 L S <br />Gardco Lighting reserves the right to change materials or modify the design of its products without <br />notification as part of the company's continuing product improvement program. Gardco's segmented <br />reflector optical system has been awarded U.S. Patent .113746854. Form XL optical system has been <br />awarded U.S. patent 11560422. The Gullwing design is protected by U.S. Patent #DES. 391.659. <br />Copyright Gardco Lighting 1999. All Rights Reserved. International Copyright Secured. <br />o 0x1'<:1-°E, <br />1 -WAY <br />1.2 <br />2 -WAY <br />2.4 <br />3 -WAY <br />3.2 <br />4 -WAY <br />3.2 <br />Gardco Lighting <br />2661 Alvarado Street <br />San Leandro, CA 94577 <br />800/227 -0758 <br />CA 510/357 -6900 <br />FAX 510/357 -3088 <br />http: / /www.GardcoLighting.com/ <br />Genlyte Thomas Group LLC <br />79115-85/399 <br />