Laserfiche WebLink
del <br />COMMUNIIV PRIDE <br />1953 - 2009 <br />515 Little Canada Road, Little Canada, MN 55117 -1600 <br />(651) 766 -4029 / FAX: (651) 766-4048 <br />mw1eci.little- canada.mn.us <br />MEMORANDUM <br />TO: Mayor Fahey & Members of the City Council <br />FROM: Greg Schroeder, Public Works Director <br />DATE: February 5, 2003 <br />RE: Replacement of Street Name Signs <br />‘11211/011. <br />Michael I. Fahey <br />COUNCIL <br />Jim LaValle <br />:Matt Anderson <br />Rick Montour <br />13ffi Blesener <br />ADMINISTRATOR <br />Joel R. Hanson <br />As requested by the Council, the following information on replacement of City street signs with <br />larger signs that also include the City's logo is provided. <br />Background: <br />We currently have 6 inch high green with 4 inch high white lettering street signs through out the <br />city similar to that shown in photo A. Over the last few years I have been receiving some <br />complaints that our street name signs are hard to read. I have tried to resolve this by having the <br />street name signs placed in more visible locations. However, some of them are still hard to see. <br />The "Manual on Uniform Traffic Control Devices" has revised its recommendations to improve <br />the legibility of street name signs. They currently recommend using upper and lower case letters <br />and that these upper case letters should be 6 inches high with 4 '/ inch high lower case letters. <br />This would result in a 9 inch high street name sign similar to what Maplewood and Vadnais <br />Heights are using as shown in photos B and C. Photos D, E and F are provided to show the <br />difference in visibility between a 6 inch and 9 inch high sign. A double faced 6 inch high sign <br />with 4" high letters cost on average around $29 each as compared to $36 for a 9 inch high sign <br />with 6" high letters. My plan was to ask the Council for authorization to upgrade to the 9 inch <br />high street name signs as the old signs were either damaged or deteriorated to the point where <br />they needed to be replaced. In addition, with Council authorization, my plan was to have 9 inch <br />high street name signs installed as by city crews as part of our street reconstruction projects as <br />well as the construction of new streets. <br />Types of Street Name Signs <br />There are many ways to install street name signs, but the two most common are with a square <br />post system or a round post system place in a corner of the intersecting streets. The square post <br />system usually four a single sided street name sign plate bolted directly to the post. This requires <br />I :VGregs \Signs \sheet Name slum:Aoe <br />1 <br />