Laserfiche WebLink
4 <br /> <br />-Side <br />--Principal 10 6.3a 10 10 10 <br />--Accessory 5 17 5 5 5 <br />Impervious Surfacec 40% TBD 40% 40% 40% <br /> <br />Per Section 1007.090(2)(a), minimum lot size is ten thousand eight hundred (10,800) square <br />feet of contiguous buildable land. Contiguous buildable land is land area occurring within the <br />property lines of a parcel or lot excluding wetlands and/or water bodies. On lots with <br />infiltration basins, the lot area is measured from a 10 foot buffer above the bottom of the basin. <br />Due to the varying lot widths, lot depths and infiltration basin, a variance is needed for <br />minimum lot size requirements. <br /> aVariances are required. <br /> b Lot 1 is being created with the existing house. Since the house already exists, it will be <br />considered legal non-conforming. <br /> cImpervious surface calculations will be required with the individual building permits for the <br />new single family homes on Lots 2, 3 and 4. <br /> <br />Comments: <br /> <br />1. The impervious surface coverage of Lot 1 shall be provided on the preliminary plat. <br />2. The preliminary plat shall be revised to show the Side Yard Setback is 10 feet for <br />principal building and 5 feet for accessory building. <br /> <br />Variances <br /> <br />The following variances are required for Golden Acre: <br /> <br />• Lots 1 thru 4: <br /> <br />o Variance to reduce the required lot size (contiguous buildable land) from 10,800 <br />s.f. to lot sizes ranging from 9,067 s.f. to 10,237 s.f. <br /> <br />o A 3 foot variance to reduce the required lot depth from 135 feet to 132 feet. <br />• Lot 1: <br /> <br />o A 3.7 foot variance to reduce the required principal building side yard setback <br />from 10 feet to 6.3 feet. <br />• Lot 2 <br />o A 2.5 foot variance to reduce the required lot width from 80 feet to 77.5 feet. <br /> <br />Resolution No. 17-64 details the Findings of Fact. <br /> <br />Building Requirements