Laserfiche WebLink
Distinctive Elements Tile &Design is an allowed use within the GB, General <br /> Business District with an approved conditional use permit. The project will not <br /> generate excessive traffic, noise, smoke,fumes, glare or odors. <br /> 9. The proposed development will not result in the destruction, loss, or damage of a <br /> natural, scenic or historic feature of major importance. <br /> There are no natural, scenic or historic features of major importance on the existing <br /> site. <br /> BE IT FURTHER RESOLVED by The City Council of Lino Lakes in addition to the <br /> administrative requirements of a conditional use permit, the following specific <br /> performance standards of Section 1007.112(8)(e), Contractor shops and offices are also <br /> being met: <br /> 1. All outside storage is prohibited. The storage of contractor equipment and materials <br /> must be completely inside. <br /> The applicant has not proposed any outside storage of materials. <br /> 2. When abutting a residential land use, a buffer area with screening and landscaping in <br /> compliance with §1007.043 (17) of this Ordinance is provided. <br /> The project site is not abutting a residential land use; therefore, this standard does not <br /> apply. <br /> BE IT FURTHER RESOLVED by The City Council of the City of Lino Lakes hereby <br /> approves the conditional use permit for a contractor shop and office for Distinctive <br /> Elements Tile & Design located at Lot 1, Block 2, Apollo Business Park No. 2 subject to <br /> the following conditions: <br /> 1. All comments from the City Engineer letter dated March 2, 2018 shall be <br /> addressed. <br /> 2. All comments from the Environmental Coordinator letter dated March 12, 2018 <br /> shall be addressed. <br /> 3. Sheet A2: <br /> a. Height of building and accessory storage building and measurements shall <br /> be included on plan sheet. <br /> 4. Review of plans by Anoka County is required prior to building permit. <br /> 5. Sheet Al should be updated to demonstrate that additional parking that satisfies <br /> Sec. 1007.44 (6) (11) (q) of the Zoning Ordinance could be provided for the <br /> proposed additions. <br /> 6. Plan sheets shall be revised to demonstrate compliance with 1007.044 (3) (h) 1 of <br /> the Zoning Ordinance. <br /> 7. A lighting plan showing compliance with intensity standards and fixture cut sheet <br /> shall be provided to staff for review and approval. <br /> 8. Sheet L1 shall be updated to show compliance with light fixture setbacks. <br /> 4 <br />