Laserfiche WebLink
b) For Multiple residential projects, not more than <br />150 square feet nor higher than 15 feet. <br />5. No sign may be closer than 10 feet to any property line. <br />D. Office Districts: In the Office Districts all signs must <br />comply with the following: <br />1. Institutional Identifications: <br />a) Public medical, educational, clinical or community <br />centers, 30 square feet or three percent of wall area, <br />whichever is greater. <br />b) Either wall or ground signs. <br />2. Business and Professional Building Identifications: <br />a) 50 Square feet or ten percent of wall area, whichever <br />greater. <br />b) Either wall or ground signs. <br />3. Area Identification Signs: One 100 square foot <br />sign per development, not higher than 12 feet. <br />4. Temporary Signs: For development projects, 150 <br />maximum, not higher than 15 feet. <br />5. No sign may be closer than 10 feet to any property line. <br />E. Neighborhood Commercial Districts: <br />is <br />maximum ground <br />1. <br />Business Signs: <br />square feet, <br />a) Sign or signs attached to building equaling twenty percent <br />of the building face area or 100 square feet, whichever is <br />greater; not higher than 6 feet above outside of parapet wall. <br />b) One ground sign or pylon sign up to 50 square feet; not <br />higher than 30 feet; not closer than 50 feet to another such <br />ground sign, but allowed only if the business is not part of <br />an integrated retail complex. <br />2. Area Identification Signs: One ground sign or pylon per <br />development; not to exceed 300 square feet nor 40 feet <br />in height. <br />3. Advertising Signs: <br />a) Not less than 200 square feet nor more than 300 square <br />feet. <br />b) Not higher than 30 feet above grade. <br />c) Must comply with General Regulations. <br />4. No sign may be closer than 5 feet to any property line without <br />a special permit therefor. <br />F. Regional Shopping Center Districts: In the Regional Shopping <br />Center Districts all signs must comply with the following: <br />