1971-056 Council Ordinances - Laserfiche WebLink

Home Search

Suitability of terrain and building conditions. Relationship to related and abutting land use. Availability of railroads. Availability of other services. Area and Design Regulation-A complete plot plan showing the building or buildings and surrounding land areas of the entire project must be sub- mitted to the Village Council for approval and in accordance with Section 5.03 (Ordinance 21-C) . Area, design and setback requirements must be such as to establish a Light and Heavy Industrial District which will best serve the general welfare and benefit of the entire Village are as follows: Percentage for Structure-The area covered by the industrial building shall not exceed 40% of the site area and the minimum depth lot shall not be less than one hundred fifty (150) feet. Front Yard Requirement-Each industrial building shall have a front yard of not less than 50 feet in depth facing any road or street. This setback shall apply to both street sides where the building is located on a corner lot. Side and Rear Yard Requirements-Each industrial building shall have a side and rear yard of not less than fifteen (15) feet for the building and no less than five (5) feet for any parking space. See Parking Ordinance. Height Regulation-No industrial building shall have a height in excess of forty-five (45) feet from grade level unless specifically granted by the Council. 6.17 LIGHT INDUSTRIAL (LI) DISTRICT These areas have the prerequisites for industrial development, but be- cause of proximity to residential areas or the need to protect certain areas or uses from adverse influences, high development standards will be necessary. "LI" uses include service industries and industries which manufacture, fabricate, assemble or store, where the process is not likely to create offensive noise, vibrations, dust, heat, smoke, odor, glare, or other objectionable influences. Generally, these include wholesale, ser- vice and light industries which are dependent upon raw materials refined elsewhere. An industrial "park" which maintains high development standards would be zoned "LI". Minimum land area for any Light Industrial (LI) District shall have at least three (3) acres of land, and the minimum building lot width at the street shall have not less than one hundred fifty (150) feet. Permitted Uses-In the Light Industrial (LI) District no building or land shall be used and no building shall be erected, converted or structurally -39-