My WebLink
|
Help
|
About
|
Sign Out
Home
Search
06-06-2022 Council Work Session Packet
LinoLakes
>
City Council
>
City Council Meeting Packets
>
2022
>
Searchable Packets
>
06-06-2022 Council Work Session Packet
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
12/12/2022 5:57:53 PM
Creation date
6/3/2022 3:30:43 PM
Metadata
Fields
Template:
City Council
Council Document Type
Council Packet
Meeting Date
06/06/2022
Council Meeting Type
Work Session Regular
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
236
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
6 <br /> <br />Principal Building 30 ft 80 ft <br />Accessory Building (trash enclosure) 5 ft 36 ft <br />Parking Lot/Driveway 10 ft 52 ft <br /> Architectural Plans and Exterior Building Materials The car wash is single story with exterior materials consisting of glass windows, EIFS, concrete <br />block veneer, stone veneer and metal overhead doors. The color palette consists of earth tone tan, white, gray, rust and bronze. The metal roofs on the car wash, vacuum building and canopies are regal blue and shall be standing seam. The ordinance allows for stucco or EIFS on no more than 30% of the primary front building <br />elevation and no more than 60% of any side or rear building elevation. The primary front elevation has 20% EIFS and rear elevation has 0% EIFS and the sides have 23% and 29%. The building has a 3ft high split face block veneer base. The materials and percentages are compliant with performance standards. <br />The car wash building height is 19ft which is less than that maximum 45ft allowed. A trash enclosure and vacuum building are proposed on the north side of the lot. Construction details provided on Sheet A405 indicate a 3ft high split face block base and stucco walls on both buildings. These are the same materials and colors as the main car wash building. The <br />trash enclosure gate is a painted metal swing gate that has 100% opacity. The enclosure is 8ft in height. The trash enclosure and vacuum building meet performance standards. Canopies are proposed over both rows of vacuums. A three (3) ft high split face block veneer <br />base matching the building shall be included on the north and south endcap steel structures of <br />both canopies. The mechanical equipment is located inside the car wash building. <br />The building will be sprinkled for fire suppression. <br /> <br />Outdoor Lighting Per Section 1007.043(6)(d), no light source shall exceed 1.0 foot candle onto right of way or <br />0.4 foot candle onto adjacent property. The Photometric Plan shall be revised to clearly show <br />all lot lines and compliance with the ordinance. Light fixtures on the both the building and 17’6” high light poles are down lit and cutoff as required by city code. <br /> <br />Off-Street Parking Requirements <br /> Per Section 1007.044(6), an auto wash/commercial car wash requires one (1) space per employee. Per the applicant’s narrative, 2-3 employees may be on site. This would require
The URL can be used to link to this page
Your browser does not support the video tag.