My WebLink
|
Help
|
About
|
Sign Out
Home
Search
06-13-2022 City Council Packet
LinoLakes
>
City Council
>
City Council Meeting Packets
>
2022
>
Searchable Packets
>
06-13-2022 City Council Packet
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
12/12/2022 6:03:02 PM
Creation date
6/13/2022 3:50:56 PM
Metadata
Fields
Template:
City Council
Council Document Type
Council Packet
Meeting Date
06/13/2022
Council Meeting Type
Regular
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
326
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
6 <br /> <br />Principal Building 30 ft 80 ft <br />Accessory Building (trash enclosure) 5 ft 36 ft <br />Parking Lot/Driveway 10 ft 52 ft <br /> <br />Architectural Plans and Exterior Building Materials <br /> <br />The car wash is single story with exterior materials consisting of glass windows, EIFS, concrete <br />block veneer, stone veneer and metal overhead doors. The color palette consists of earth tone <br />tan, white, gray, rust and bronze. The metal roofs on the car wash, vacuum building and <br />canopies are regal blue and shall be standing seam. <br /> <br />The ordinance allows for stucco or EIFS on no more than 30% of the primary front building <br />elevation and no more than 60% of any side or rear building elevation. The primary front <br />elevation has 20% EIFS and rear elevation has 0% EIFS and the sides have 23% and 29%. The <br />building has a 3ft high split face block veneer base. The materials and percentages are <br />compliant with performance standards. <br /> <br />The car wash building height is 19ft which is less than that maximum 45ft allowed. <br /> <br />A trash enclosure and vacuum building are proposed on the north side of the lot. Construction <br />details provided on Sheet A405 indicate a 3ft high split face block base and stucco walls on <br />both buildings. These are the same materials and colors as the main car wash building. The <br />trash enclosure gate is a painted metal swing gate that has 100% opacity. The enclosure is 8ft <br />in height. The trash enclosure and vacuum building meet performance standards. <br /> <br />Canopies are proposed over both rows of vacuums. A three (3) ft high split face block veneer <br />base matching the building shall be included on the north and south endcap steel structures of <br />both canopies. <br /> <br />The mechanical equipment is located inside the car wash building. <br /> <br />The building will be sprinkled for fire suppression. <br /> <br />Outdoor Lighting <br /> <br />Per Section 1007.043(6)(d), no light source shall exceed 1.0 foot candle onto right of way or <br />0.4 foot candle onto adjacent property. The Photometric Plan shall be revised to clearly show <br />all lot lines and compliance with the ordinance. <br /> <br />Light fixtures on the both the building and 17’6” high light poles are down lit and cutoff as <br />required by city code. <br /> <br />Off-Street Parking Requirements <br /> <br />Per Section 1007.044(6), an auto wash/commercial car wash requires one (1) space per <br />employee. Per the applicant’s narrative, 2-3 employees may be on site. This would require
The URL can be used to link to this page
Your browser does not support the video tag.