08-01-2022 Council Work Session Packet

Home Search

Custom Fire Apparatus, Inc. • Air cleaner skid plate (if applicable) • Radiator skid plate (if applicable) • Battery supports • Battery trays (unless material/finish is specified in 5106 subcat) • Battery covers (unless material/finish is specified in 5107 subcat) The frame parts which are not galvanized shall be powder coated prior to any attachment of components. Parts which shall be powder coated shall include but are not limited to: • Bumper extensions • Steering gear bracket • Air tanks (unless color coded tanks are specified in 3205 subcat) Other non -galvanized under carriage components which are received from the suppliers with coatings already applied shall include but are not limited to: • Suspension components • Front and rear axles All powder coatings, primers and paint used on the non -galvanized components shall be compatible with all metals, pretreatments and primers used. The cross hatch adhesion test per ASTM D3359 shall not have a fail of more than ten (10) squares. The pencil hardness test per ASTM D3363 shall have a final post -curved pencil hardness of H-2H. The direct impact resistance test per ASTM D2794 shall have an impact resistance of 120.00 inches per pound at 2 mils. FRAME ASSEMBLY STRUCTURAL Purchaser shall receive a Frame Assembly Structural Twenty (50) Years or 250,000 Miles limited warranty in accordance with, and subject to, warranty certificate RFW0305. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request. FRAME RAIL CORROSION Purchaser shall receive a Frame Rail Corrosion (Zinc Plate and Powder Coat) Twenty Five (25) Years or 150,000 Miles limited warranty in accordance with, and subject to, warranty certificate RFW0316. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request. FRAME COMPONENTS CORROSION Purchaser shall receive a Frame Components Corrosion (Zinc Plate) Twenty (20) Years or 132,000 Miles limited warranty in accordance with, and subject to, warranty certificate RFW0314. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request. FRONT BUMPER The chassis shall include a formed channel front bumper. The bumper shall be constructed of 110 psi high strength low alloy steel. The bumper material shall measure 10.25 inches high with a 3.50 inch flange and shall be 0.38 inch thick and 104.50 inches wide, with 45.00 degree angled front corners. 07/26/22 -32-