Laserfiche WebLink
Custom Fire Apparatus, Inc. <br />integral with the construction of the cab for rigidity and strength. The middle step shall be integral with <br />the cab construction and shall be trimmed with a Flex-TredO adhesive grit surface material. <br />UNDER CAB ACCESS DOOR <br />The cab shall include an aluminum access door in the left crew step riser painted to match the cab <br />interior paint with a push and turn latch. The under cab access door shall provide access to the diesel <br />exhaust fluid fill. <br />INTERIOR DOOR TRIM <br />The interior trim on the doors of the cab shall consist of an aluminum panel constructed of Marine Grade <br />5052-H32 0.13 of an inch thick aluminum plate. The door panels shall include a painted finish. <br />DOOR TRIM CUSTOMER NAMEPLATE <br />The interior door trim on the front doors shall include a customer nameplate which states the vehicle was <br />custom built for their Department. <br />CAB DOOR TRIM REFLECTIVE <br />The interior of each door shall include high visibility reflective tape. A white reflective tape shall be <br />provided vertically along the rear outer edge of the door. The lowest portion of each door skin shall <br />include a reflective tape chevron with red and white stripes and a Spartan logo. The chevron tape shall <br />measure 6.00 inches in height. <br />INTERIOR GRAB HANDLE "A" PILLAR <br />There shall be two (2) rubber covered 11.00 inch grab handles installed inside the cab, one on each "A" <br />post at the left and right door openings. The left handle shall be located 7.88 inches above the bottom of <br />the door window opening and the right handle shall be located 2.88 inches above the bottom of the door <br />window opening. The handles shall assist personnel in entering and exiting the cab. <br />INTERIOR GRAB HANDLE FRONT DOOR <br />Each front door shall include one (1) ergonomically contoured 9.00 inch cast aluminum handle mounted <br />horizontally on the interior door panels. The handles shall feature a textured black powder coat finish to <br />assist personnel entering and exiting the cab. <br />INTERIOR GRAB HANDLE REAR DOOR <br />A black powder coated cast aluminum assist handle shall be provided on the inside of each rear crew <br />door. A 30.00 inch long handle shall extend horizontally the width of the window just above the window <br />sill. The handle shall assist personnel in exiting and entering the cab. <br />INTERIOR SOFT TRIM COLOR <br />The cab interior soft trim surfaces shall be black in color. <br />INTERIOR TRIM SUNVISOR <br />The header shall include two (2) sun visors, one each side forward of the driver and officer seating <br />positions above the windshield. Each sun visor shall be constructed of Masonite and covered with <br />padded black vinyl trim. <br />INTERIOR FLOOR MAT COLOR <br />07/26/22 <br />-42- <br />