08-01-2022 Council Work Session Packet

Home Search

Custom Fire Apparatus, Inc. The cab sides shall include two (2) Whelen M6 Super LED warning lights, one (1) on each side. The lights shall feature multiple flash patterns including steady burn for solid colors and multiple flash patterns for split colors. The lights shall be mounted to the sides of the cab within a chrome bezel. SIDE WARNING LIGHTS COLOR The warning lights located on the left side of the cab shall be red in color and the warning lights located on the right side of the cab shall be blue in color. SIDE WARNING LIGHTS LOCATION The warning lights on the side of the cab shall be mounted over the front wheel well directly over the center of the front axle. SIDE AND INTERSECTION WARNING SWITCH The side warning lights shall be controlled through a virtual button on the Vista display and control screen. This button shall be clearly labeled for identification. ROTO-RAYS WARNING LIGHT A Roto-Rays® warning light shall be provided on the cab. The Roto-Rays light shall consist of three (3) round chrome heads, each equipped with an LED light. The LED lights shall be one (1) red, one (1) blue, and one (1) green in color. The Roto-Rays light shall be installed on the top center of the cab front fascia using a custom bracket. When activated, the entire light head assembly shall rotate at 200 RPM. ROTO-RAYS WARNING LIGHT SWITCH The Roto-Rays® front warning light(s) shall be separately controlled through a virtual button on the Vista display and control screen. When the parking brake is engaged the light shall stop rotating. SIREN CONTROL HEAD A Whelen 295SLSA1 electronic siren control head with hard wired microphone shall be mounted in the cab dash center panel in a location specified by the customer. The siren shall offer a selectable 100 or 200-watt output, radio broadcast, public address, and seventeen (17) Scan -Lock siren tones and hands free operation which shall allow the operator to turn the siren on and off from the steering wheel horn ring if a horn/siren selector switch option is also selected. The siren circuitry shall be placed behind the rocker switch panels under the electrical cover with a 30.00 inch loop for the OEM to route as desired. STEERING WHEEL HORN BUTTON SELECTOR SWITCH A rocker switch shall be installed in the switch panel between the driver and officer to allow control of either the electric horn or the mechanical siren. The electric horn shall sound by default when the selector switch is in either position to meet FMCSA requirements. AUDIBLE WARNING RH FOOT SWITCH A foot switch wired to actuate the mechanical siren(s) shall be supplied for installation in the front section of the cab for officer actuation. MECHANICAL SIREN FOOT SWITCH RH 07/26/22 -57-