Laserfiche WebLink
Custom Fire Apparatus, Inc. <br />ball and spring loaded self-adjusting seal assembly (located inside pump enclosure), and push-pull <br />chrome "locking -style" discharge control handle located on the pump operator's control panel. <br />DRIVER SIDE LARGE DIAMETER DISCHARGE <br />One (1), driver's side 4" gated discharge to be furnished with: 2.5" NST chrome plated brass rocker lug <br />cap with chain, 2.5" NST male x 5" Storz lightweight adapter, 5" Storz x 4" NST swivel female <br />30-degree elbow lightweight outlet adapter, 4" i.d. extension nipple (extending through pump panel), <br />bronze bleeder valve located inboard pump panel with remote control knob adjacent to discharge outlet, <br />3.5" Waterous "ELECTRIC ACTUATOR OPERATED" 1/4-turn discharge valve with chrome plated <br />ball and spring loaded self-adjusting seal assembly (located inside pump compartment), operator's panel <br />mounted valve control console with spring loaded open/close and appropriate cast iron pump discharge <br />fitting. <br />DELUGE DISCHARGE <br />DELUGE DISCHARGE LOCATION <br />The specified Deluge Discharge outlet shall be located above the "midship" fire pump module. <br />MONITOR SUPPORT BRACKET <br />A stainless steel fabricated monitor support bracket is to be furnished, located beneath the top of pump <br />module, designed to prevent movement of the monitor/deluge device throughout the range of movement <br />and flow capacity. Support is to be bolted in position and removable so as to allow for disassembly of the <br />deluge discharge. In addition to the monitor support, the underside of surrounding deck plating is to be <br />reinforced with channel steel brackets to support the weight of two (2) firefighters. <br />TOP DELUGE DISCHARGE - ELECTRIC OPERATED VALVE <br />One (1), top (above pump) gated deluge discharge to be furnished with: 3" riser outlet thread/flange, 3" <br />i.d. stainless steel stationary riser pipe, .75" bronze "auto -drain" valve located immediately downstream <br />of gate valve, 3.5" Waterous "ELECTRIC ACTUATOR OPERATED" 1/4-turn discharge valve with <br />chrome plated ball and spring loaded self-adjusting seal assembly (located inside pump compartment), <br />operator's panel mounted valve control console with spring loaded open/close toggle switch and <br />"OPEN/MULTIPLE-TRANSITION/CLOSED" indicator light. <br />NOTE: The exterior deluge riser piping (and flange where provided) shall be covered, fully enclosed, <br />with polished 4-way aluminum treadplate cylindrical shroud. <br />07/26/22 <br />-97- <br />