Laserfiche WebLink
Custom Fire Apparatus, Inc. <br />Passenger's side compartments are to be provided: one (1) each full height ahead of, two (2) each upper <br />level above tandem wheelwell (either side of the equipment rack truss frame assembly) and one (1) each <br />full height behind rear wheelwell housing. <br />Driver's side compartments are to be provided: one (1) each full height ahead of, two (21) each upper <br />level above tandem wheelwell (either side of the equipment rack truss frame assembly) and one (1) each <br />full height behind rear wheelwell housing. <br />COMPARTMENT DOORS AND DOOR ACCESSORIES: <br />The following specified roll -up style compartment door tracks/extrusions to be "flush" with exterior body <br />panels/door jambs. NOTE: Specified roll -up compartment doors shall be manufactured in the United <br />States of America. <br />Specified compartment door jambs shall be fabricated with inboard flanges which are machined for <br />screw type fasteners and mounting of specified roll -up compartment door aluminum side track <br />extrusions. <br />All side compartment doors shall be ROM Robinson roll -up shutter style, complete with: Extruded <br />aluminum shutter slats which are Urethane painted to match apparatus color, anodized tubular bar style <br />bottom rail latch, anodized extruded aluminum vertical side tracks with removable neoprene rubber <br />weather-stripping, urethane painted top door opening extrusions with removable neoprene rubber <br />weather-stripping, and spring loaded "front roll" door lift/roll-up mechanism. <br />Each individual roll -up extruded aluminum door shall be of maximum size for the available door <br />opening. Front and rear extruded aluminum door tracks shall be furnished, bolted to vertical door jambs <br />and interior compartment bulkheads so as to be easily removable for repairs or modifications. All roll -up <br />style compartment doors shall be installed and adjusted during body construction. NOTE: Roll -up door <br />tracks which are riveted or welded in position are not acceptable. <br />The following specified door opening sizes may be reduced by no more than 3" total width (1.5" per <br />side) and 4" total height. Decrease in compartment opening sizes is caused by profile of side track <br />extrusions with weather-stripping and bottom door slat which remains in door opening. <br />PAINTED ROLL -UP DOOR TRACKS AND BOTTOM DOOR SLATS <br />The above specified roll -up door extruded aluminum side tracks, and the bottom door slat of all doors, <br />shall be painted job color, to match door bundle slats. <br />COMPARTMENT HEADER PLATE <br />Specified exterior body compartments are to be trimmed at top with 6" extruded aluminum header plate. <br />Header is to be painted job color. <br />07/26/22 <br />- 112 - <br />