My WebLink
|
Help
|
About
|
Sign Out
Home
Search
08-01-2022 Council Work Session Packet
LinoLakes
>
City Council
>
City Council Meeting Packets
>
2022
>
Searchable Packets
>
08-01-2022 Council Work Session Packet
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
12/12/2022 7:05:31 PM
Creation date
8/3/2022 12:34:39 PM
Metadata
Fields
Template:
City Council
Council Document Type
Council Packet
Meeting Date
08/01/2022
Council Meeting Type
Work Session Regular
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
831
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
Custom Fire Apparatus, Inc. <br />UPPER LEVEL SHELVING <br />The following shall be installed in upper level of compartment. <br />SHELVING <br />Eight (8) 3/16" smooth aluminum shelves with 2" tall side walls shall be furnished. <br />Each shelf shall be vertically adjustable and equipped with spring loaded positioning pins at all 4 <br />attachment points. <br />VINYL TILE, SHELF/TRAY LINER, BLACK <br />The shelf and or tray installed in the compartment shall be furnished with .75" black vinyl tiles cut to the <br />size of the inside pan to provide a liner for drainage of fluids and air circulation. A total of eight (8) shall <br />be furnished. <br />TRAY, SLIDE OUT, FLOOR MOUNT <br />Furnished within the compartment shall be a tray constructed of .188" smooth aluminum and shall have a <br />load capacity of 600 pounds. The tray shall be sized to fit the compartment interior dimensions. <br />Each tray shall be a single piece fabrication with 2.50" perimeter flanges that are welded in the corners <br />forming a pan and providing a recessed area. The front tray flange shall be formed with a double flange, <br />out and down, to provide a pull handle. The tray shall be fastened to European style extruded precision <br />slide assemblies on each side that are attached to angles bolted to the compartment floor. The tray shall <br />be held in both the stored and extended position with the use of a gas strut that does not require any type <br />of mechanical latch and allows 110% extension out of the compartment. <br />12-VOLT USB RECEPTACLE <br />Three (3), 12-volt USB receptacle(s) shall be furnished, wired to chassis 12-volt electrical system, <br />properly fused. <br />MULTIPLE BODY COMPARTMENT - 125-VOLT RECEPTACLES, SHOREPOWER <br />Six (6) each, 125-volt, household 20-amp 3-wire duplex (2-total) plug-in receptacles shall be furnished, <br />interior of apparatus body compartment(s), located as designated, with: surface mounted cast aluminum <br />receptacle box, 125-volt 5-20 3-wire household plug-in receptacle, metal cover plate, protected wiring to <br />the specified shoreline, and engraved nameplate identifying voltage and power source. <br />125-VOLT POWER RECEPTACLE LOCATIONS) <br />07/26/22 <br />- 129 - <br />
The URL can be used to link to this page
Your browser does not support the video tag.