Laserfiche WebLink
Custom Fire Apparatus, Inc. <br />The location(s) above specified 'Body Compartment" line voltage receptacle(s) to be determined at the <br />Pre -Build conference. <br />TOOL BOX, CTECH, FOUR DRAWER <br />A four drawer CTECH model DH-1 tool box shall be furnished. The tool box shall be custom fabricated <br />from aluminum panels and powder coated. <br />The tool box shall be 40.00" wide x 26.00" high x 22.00" deep and shall contain four pull out drawers <br />installed on ball bearing slide tracks. Three drawers shall be 6.00" deep and one drawer shall be 4.00" <br />deep. Each drawer shall be furnished with an exclusive drawer handle which allows for one hand motion <br />opening and closing with latching for transport. <br />TIP OUT SPREADER MOUNT <br />One (1), Fabricated aluminum pockets shall be provided to accommodate Hydraulic Rescue Spreader or <br />Hydraulic Rescue Combo. <br />Pocket shall be constructed of .1875 aluminum and tapered towards bottom for proper fit. <br />An external pivot point shall be provided with side mounted compressed gas struts installed in an over <br />the center configuration to hold pocket in vertical and rotated positions. <br />A rubber strip shall be provided to prevent hand and finger injury. <br />Tool Mounting Location <br />The above specified cutter/spreader tool(s) are to be mounted <br />TIP OUT CUTTER MOUNT <br />One (1), Fabricated aluminum pockets shall be provided to accommodate Hydraulic Rescue Cutter. <br />Pocket shall be constructed of .1875 aluminum and tapered towards bottom for proper fit. <br />An external pivot point shall be provided with side mounted compressed gas struts installed in an over <br />the center configuration to hold pocket in vertical and rotated positions. <br />A rubber strip shall be provided to prevent hand and finger injury. <br />Tool Mounting Location <br />07/26/22 <br />- 130 - <br />