08-01-2022 Council Work Session Packet

Home Search

Custom Fire Apparatus, Inc. Up to 48 square feet of 6" multiple diagonal 3M ScotchLite or an equivalent brand reflective stripes are to be provided, full width at rear of apparatus body. Stripes are to form "Chevrons", using alternating Ruby Red/Lemon Yellow reflective stripes, only interrupted by the rear apparatus lighting, handrails, steps, and other bolt -on accessories. Chevron patterned material is to be applied on to the flat metal "painted" surface, prior to the final installation of the specified bolt -on (removable) fixtures and accessories. Stripes shall be oriented at 45-degree angle, sloping downward and away from centerline of vehicle. LINE VOLTAGE SYSTEM SHORELINE/GENERATOR TRANSFER SWITCH The following specified line voltage receptacles and/or power strips are to be "dual powered". A transfer switch is to be furnished, wired to both the shoreline and the specified generator power sources. System is to automatically transfer the power source for the designated 125 -Volt receptacles/strips (totaling a maximum amperage capacity of 20-Amps), from the Shore Power to the Generator. Transfer is to take place upon start-up of the generator system. 120V/240V ELECTRICAL SYSTEM AND ACCESSORIES The following specified 120/240 -Volt alternating current system shall meet the requirements of NFPA 1901, as it relates to vehicle mounted systems, including but not limited to: Materials, Grounding, Overcurrent Protection, Wiring Methods, Wiring identification, Wet Locations, Dry Locations, Receptacle Listings, Electrical System Testing, Placarding, and Operational Testing. 120/240 VOLT HYDRAULIC GENERATOR SET - HARRISON 6KW A Harrison model 6.OMAS, hydraulic driven generator set shall be installed on the apparatus. The continuous duty rating of the generator shall be 6,000 watts at 120/240 -Volts. Current frequency shall be stable at 60 hertz. The dimensions of the power generating unit shall be 30" long x 18" wide x 16" high. A 12-volt cooling fan shall be installed on the power unit to ensure maximum performance under all conditions. The 5-gallon hydraulic oil reservoir shall be equipped with a 10 micron filter assembly provided in the tank on the return line. A Chelsea "Hot Shift" 10-bolt transmission power take off shall be of the heavy duty type, mounted directly on the transmission of the chassis. The driveline shall be hollow tube type, with heavy duty universals and splined shaft for movement between the chassis components and the generator. The engagement of the power take off shall be in the chassis cab with rocker switch and pilot light labeled GENERATOR PTO ENGAGED to note engagement of the power take off. An engraved nameplate indicating the chassis transmission shift selector position to be used for generator operation shall be provided in the cab, located so that it can easily be read from the driver's position. A switch shall be 07/26/22 - 159 -