05-06-2024 Council Work Session Packet

Home Search

1. Definitions. For the purpose of this section and §§ 1007.044 through 1007.051, the following definitions shall apply: ARCHITECTURAL METAL CLADDING. Refers to decorative, metal cladding systems such as copper, zinc, titanium, stainless steel and painted steel components fixed to the outside of the primary wall system. ARCHITECTURAL REVEALS. A groove or a step in a panel face generally used to create a desired architectural effect. 2. All sides exterior walls of the principal and accessory structures are to have essentially the same or a coordinated harmonious finish treatment. 3. Classes of primary materials. For the purpose of this section, primary materials shall be divided into class 1, class 2, and class 3 categories as follows: Classes of Primary Materials Class 1 Class 2 Class 3 Brick Precast concrete panels with at least two architectural reveals per panel Exterior Insulation and Finish Systems (EIFS) Glass, or other glazing materials Specialty concrete block including textured, burnished block or rock faced block Fiber Cement Exterior Siding Natural or cultured stone Ceramic Tile (masonry, stone or clay), Glass Block Architecturally textured concrete precast or poured in place panels Masonry Stucco Masonry Stucco Architectural metal cladding Wood Other materials not listed that are of equal quality to materials in a specific class may be approved for use by the Community Development Director. 4. Buildings shall incorporate classes of primary material in the following manner: a. Commercial, public, educational and religious buildings. At least 50% of all each exterior wall finishes shall be composed of at least three class 1 materials. Class 3 materials shall not comprise more than 25% of each exterior wall finishes. 37