06/26/2000 Council Packet - Laserfiche WebLink

Home Search

ANALYSIS Dairy Queen June 26, 2000 page 2 The submittal complies with the GB zoning standards as follows: • Building The building footprint is 1655 sf (roughly 40 x 40). The proposed elevations originally submitted showed predominantly corrugated metal panels with red glazed brick around the foundation. The City does not allow metal panels to comprise more than 50% of the entire building (all elevations). On elevations facing a street, metal panels may not exceed 20% of the wall surface. (Sec. 3 Subd. 4.B.1. of the zoning ordinance.) The applicant's architect submitted revised elevations on April 4. The new elevations show EFIS rather than metal panels. EFIS is a simulated stucco, which is acceptable. The building's tallest point will be 18 ft., though the proposed sign will be 19+ ft. The north elevation will include 26 ft of glass windows at the pedestrian level. The west elevation, facing 21st Ave., will include one door and the drive- through pickup window. The south elevation will include a fenced in area for the cooler /freezer. The fence material will be painted cedar. The east elevation, facing the parking lot, will include a double door and 20+ ft of windows. The trash will be enclosed in the southeast corner of the parking lot. The fencing material will be painted cedar. • Lighting Light fixture locations in the parking lot are shown on submitted plans. Building and site lighting should be addressed with a photometric showing site lighting intensity. Lighting must not exceed one foot candle at the street center lines. Lot lighting must be directed downward and not up into the night sky. Required Proposed Lot size minimum 20,000 sf 29,223 Lot width minimum 100 ft 130 ft Setbacks: buildings from street rear lot line side lot line parking from street rear lot line side lot line 30 ft 30 ft 10 ft 15 ft 10 ft 10 ft 30 ft 130 ft 45 ft 15 ft 18 ft 10 ft Bldg. height 45 ft 18 ft Green space 25% 37% • Building The building footprint is 1655 sf (roughly 40 x 40). The proposed elevations originally submitted showed predominantly corrugated metal panels with red glazed brick around the foundation. The City does not allow metal panels to comprise more than 50% of the entire building (all elevations). On elevations facing a street, metal panels may not exceed 20% of the wall surface. (Sec. 3 Subd. 4.B.1. of the zoning ordinance.) The applicant's architect submitted revised elevations on April 4. The new elevations show EFIS rather than metal panels. EFIS is a simulated stucco, which is acceptable. The building's tallest point will be 18 ft., though the proposed sign will be 19+ ft. The north elevation will include 26 ft of glass windows at the pedestrian level. The west elevation, facing 21st Ave., will include one door and the drive- through pickup window. The south elevation will include a fenced in area for the cooler /freezer. The fence material will be painted cedar. The east elevation, facing the parking lot, will include a double door and 20+ ft of windows. The trash will be enclosed in the southeast corner of the parking lot. The fencing material will be painted cedar. • Lighting Light fixture locations in the parking lot are shown on submitted plans. Building and site lighting should be addressed with a photometric showing site lighting intensity. Lighting must not exceed one foot candle at the street center lines. Lot lighting must be directed downward and not up into the night sky.