07/12/2000 P&Z Packet - Laserfiche WebLink

Home Search

Twin City Fab, Inc. July 12, 2000 page 2 • ANALYSIS The submittal complies with the LI Light Industrial zoning standards as follows: • Building The building footprint is approximately 19,200 sf, roughly 160' x 120'. The building will be 21' high except in the back (north side), where the ground elevation will be lower by seven feet to provide for loading three docks. Precast concrete panels will form the exterior walls. Most of the building will be fabricating /warehouse space. Offices in the southwest portion will comprise about 2040 sf. The trash area will be attached to the back of the building and enclosed by concrete block walls and prefinished metal panel gates. The two areas noted as "future expansion" are not part of this review. Any additions to the building will require a new site plan review and, possibly, an amendment to the storage CUP. • Lighting Light fixture locations are shown on submitted plans as shoebox fixtures on the building walls. The submitted photometric plan showing site lighting intensity indicates that the project complies with the maximum of one foot candle at the street centerline. The shoebox fixtures will ensure lighting is directed downward and not up into the night sky. • Signage The only signage shown on the submittals is on the front facade. Signage is governed by the City's sign ordinance and permits are required for all signs. All signs will be reviewed with the sign permit applications. Required Proposed Lot size minimum 1 acre 4 acres Lot width minimum 100 ft 307 ft Setbacks: buildings from street rear lot line side lot line parking from street rear lot line side lot line 50 ft 30 ft 10 ft 15 ft 5 ft 5 ft 85 ft 300 ft 10 ft 15 ft 400 ft 10 ft Bldg. height 45 ft 21 ft Green space 10% >10% • Building The building footprint is approximately 19,200 sf, roughly 160' x 120'. The building will be 21' high except in the back (north side), where the ground elevation will be lower by seven feet to provide for loading three docks. Precast concrete panels will form the exterior walls. Most of the building will be fabricating /warehouse space. Offices in the southwest portion will comprise about 2040 sf. The trash area will be attached to the back of the building and enclosed by concrete block walls and prefinished metal panel gates. The two areas noted as "future expansion" are not part of this review. Any additions to the building will require a new site plan review and, possibly, an amendment to the storage CUP. • Lighting Light fixture locations are shown on submitted plans as shoebox fixtures on the building walls. The submitted photometric plan showing site lighting intensity indicates that the project complies with the maximum of one foot candle at the street centerline. The shoebox fixtures will ensure lighting is directed downward and not up into the night sky. • Signage The only signage shown on the submittals is on the front facade. Signage is governed by the City's sign ordinance and permits are required for all signs. All signs will be reviewed with the sign permit applications.