04/27/1998 Council Packet - Laserfiche WebLink

Home Search

2 Must not be closer than seven hundred fifty (750) radius feet of another advertising structure. Shall not be closer than twelve hundred (1,200) feet to another such advertising structure on the same side of an interstate freeway. For the purpose of this Ordinance, a back -to -back or V -type sign shall be considered as one structure. The applicant's site plans place the proposed signs in 1,200 foot intervals, measured from 80th Street North. The proposed signs are compliant with the required setback between advertising structures. 3. Must not be closer than twelve hundred (1,200) feet from any adjoining zoning district. Based on the plans submitted, Sign 1 displays a setback of Tess than 1,200 feet from the GB, General Business Zoning District to the south. The applicant should verify that the sign is placed at least 1,200 feet from the GB Zoning District. Sign Area. Maximum size of sign shall not exceed 675 square feet. The proposed signs have a sign area of (14 feet by 48 feet) 672 square feet and a height of 40 feet in accordance with sign ordinance standards. Site Area and Width. The site on which the sign is located shall comply with all area and width requirements of the base zoning district. The proposed sites all meet or exceed the R -BR lot area and width requirements. The signs display proper setbacks from the lot lines. Sign Removal. Removal of the sign shall be required with the rezoning of the site or redevelopment to add another principal use. Based on discussion during the comprehensive plan update, commercial and industrial expansion is anticipated to extend north along I -35E during the next 10 years. This expansion will likely encompass Signs 1 and 2. If this occurs, the signs may need to be removed after only a short period of time. In recognition of these circumstances, the applicant may wish to reconsider the location and construction of Signs 1 and 2. The interim use permit runs with the property. In this respect, it is important that both the property owner and the applicant be aware that upon rezoning or redevelopment of the site, the interim use signs must be removed from the site. The dismantling and removal of the sign is the responsibility of the property owner and applicant. In this respect, the terms, conditions and responsibility for removing the signs will be described in detail in the interim use permits. Additionally, the City should require both property owner and applicant to sign the interim use permit.