1992-012 Council Ordinances - Laserfiche WebLink

Home Search

will be cast and the compressive strength determined by a qualified testing laboratory. (e) Bituminous Samples. Bituminous samples shall be taken during placement and tested by a qualified testing laboratory to check the bituminous content, gradation and Marshall density of the bituminous material. (f) Test Frequencies. Test frequencies shall be determined by the city engineer or public works director. With the exception of test rolling (paragaph (b) ) , a minimum of two (2) tests will be required. 302.06 Construction Completion and Warranty Subd. 1 Building Construction Permit. No permit shall be issued for the construction of a new building in a subdivision until the rough grading of the public street providing access thereto has been completed, and where ,,ON applicable, sewer and water construction in connection therewith has been completed or is under construction. Occupancy permits for residents in a new subdivision shall not be issued until one course of bituminous surfacing is in place. Subd. 2 Partial Maintenance. After a street has been completed to a point where curb and gutter, the base course, and the bituminous binder course are installed and after building permits have been issued for construction of buildings on property fronting on said streets the street shall be placed on the routine maintenance list of the City. Snow plowing operations will be carried on in the winter time. This shall not in any way constitute final acceptance by the City and such maintenance or partial acceptance by the Council shall not have any effect upon agreements existing between the City and the developer for further inprovements on such streets. The wearing course shall not be placed until 80% of the housing units in the development ae substantially completed. Subd. 3 Sealcoatina. Approximately two (2) years after the placement of the wearing course mixture, a sealcoat consisting of a CRS emulsified asphalt conforming to Mn/DOT 57