Laserfiche WebLink
ii. Minimum twenty (20) foot setback from property <br /> line. <br /> C. Advertising Signs: <br /> i. Observe minimum building setback line or <br /> twenty (20) foot setback, whichever is <br /> greater. <br /> ii. Not to exceed building height limit of the <br /> zone. <br /> iii. Must not be within seven hundred fifty (750) <br /> radius feet of an existing residential <br /> structure or other advertising structure in a <br /> non-freeway area. <br /> iv. Must not be closer than seven hundred (750) <br /> radius feet to another advertising structure. <br /> Shall not be closer than twelve hundred (1200) <br /> feet to another such advertising structure on <br /> the same side of an interstate freeway. For <br /> the purpose of this Ordinance, a back-to-back <br /> or V-type sign shall be considered as one <br /> �•.� structure. <br /> V. Must comply with the General Regulations. <br /> Section IV. General Regulations. <br /> SECTION IV. <br /> GENERAL REGULATIONS APPLICABLE TO ALL DISTRICTS. <br /> Subdivision 1. <br /> Advertising Signs in districts where permitted, must <br /> comply with the following: <br /> 1. Shall only be fabricated of and erected on steel <br /> and built to a minimum of thirty (30) pounds per <br /> square foot windload factor. <br /> 2 . Shall not be longer than sixty (60) feet. <br /> 3 . Shall have a maximum square footage restriction of <br /> seven hundred fifty (750) square feet. <br /> Subdivision 2 . <br /> All signs other than temporary signs, residential <br /> identification nameplate signs and residential area <br /> identification signs shall be constructed of, and <br /> r <br /> erected upon steel or steel component structures. <br /> Page 13 <br />