Laserfiche WebLink
A. Standards: The design, fabrication, and installation of the additional items for this water reservoir <br />shall be in accordance with the requirements of the current American Water Works Association <br />Specification ANSI/AWWA D100 for Welded Tanks for Water Storage. <br />B. Approvals: The requirements of OSHA and the Minnesota Industrial Commission shall be followed <br />for the design and construction of the additional items and all other pertinent aspects of OSHA <br />shall be followed in carrying out this Contract. <br />PART 2 PRODUCTS <br />2.01 STEEL MATERIAL <br />A. All steel material shall be A36 rolled sections and plates. <br />2.02 GASKETS <br />A. Buna-N Rubber with a durometer hardness of 50 on the Shore Scale as manufactured by Power <br />Process Equipment, phone (612) 937-1000. <br />B. For flat cover ventilation manways, roof vents and similar applications use a flat style gasket that is <br />1/8 -inch thick and use either a neoprene or an EPDM material with a durometer hardness of 50 on <br />the Shore A scale. <br />STEEL WATER RESERVOIR REPAIRS <br />© 2012 Stantec 1 193802262 33 01 16 - 3 <br />