Laserfiche WebLink
PART 2 - PRODUCTS <br />2.01 Shop Drawings and Coordination Drawings: <br />A. Scale and Measurements: <br />1. Make all shop drawings accurate to a scale sufficiently large to show all <br />pertinent aspects of the item. <br />B. Type of Prints Required: <br />1. Submit all shop drawings in the form of four (4) black line prints of each <br />sheet to the Architect/Engineer. <br />C. Review of Shop Drawings: <br />1. Distribution of reviewed shop drawings for the Contractors use will be by <br />the Architect/Engineer. All review comments by the Architect/Engineer <br />will be shown on the original submittal when it is returned to the <br />Contractor. The Architect/Engineer shall make and distribute all copies <br />required. <br />2.02 Manufacturer's Literature: <br />A. General: <br />1. Where contents of submitted literature from manufacturers includes data <br />not pertinent to the submittal, clearly indicate which portion of the <br />contents is being submitted for review. <br />B. Number of copies required: <br />1. Submit a minimum of four (4) copies, two (2) of which will be retained by <br />the Architect/Engineer. <br />2.03 Samples: <br />A. Accuracy of Samples: <br />1. Samples shall be of the precise article proposed to be furnished. <br />B. Number of Samples Required: <br />1. Unless otherwise specified, submit two samples. <br />2.04 Colors: <br />A. Unless the precise color is specifically described in the contract documents, and <br />whenever a choice of color is available in a specified product, submit accurate <br />color charts to the Architect/Engineer for review and selection. <br />Submittal Procedures <br />01 33 00-2 <br />City of Lino Lakes <br />Lino Lakes Fire Station #1 <br />RSI Project #15-12120-02 <br />