Laserfiche WebLink
Section 07 22 16 <br />ROOF BOARD INSULATION <br />PART 1— GENERAL <br />1.01 Description: <br />A. Work included: <br />1. Provide and install all roof and deck insulation and insulation fasteners as <br />shown on the roof plan and detail drawings. <br />1.02 Quality Assurance: <br />A. Standards: Comply with standards specified in this section and as listed in the <br />general requirements. <br />B. Qualifications of manufacturer: Products used in the work included in this section <br />shall be produced by manufacturers regularly engaged in the manufacture of <br />similar items and with a history of successful production acceptable to the <br />Architect/Engineer. <br />C. Qualifications of Contractor: The Contractor and contract personnel shall be <br />currently approved by the manufacturer of the approved products as qualified to <br />install the materials of this section. <br />D. Qualifications of Installers: Use an adequate number of skilled installers who are <br />thoroughly trained and experienced in the necessary crafts and who are <br />completely familiar with the specified requirements and the methods needed for <br />proper performance of the work in this section. <br />1.03 Related Work: <br />A. Section 07 53 23 Fully Adhered EPDM Roofing <br />1.04 References: <br />A. Materials used in this section shall be listed in the latest editions of the following: <br />1. Factory Mutual Approval Guide. <br />2. Underwriters Laboratories, Inc. - building materials directory. <br />3. The NRCA Roofing and Waterproofing Manual, 5th Edition — National <br />Roofing Contractors Association <br />B. Roof insulation must meet the requirements of FM 4450 or UL 1256. <br />City of Lino Lakes <br />Lino Lakes Fire Station #1 <br />RSI Project #15-12120-02 <br />Roof Board Insulation <br />07 22 16-1 <br />