Laserfiche WebLink
23 <br /> <br />x. Retaining Walls (wall heights and elevations). <br />xi. Locations, grades, rim and invert elevations of all storm sewer facilities, <br />including ponds and BMP’s proposed to serve the tract. <br />xii. Locations and elevations of all street high and low points. <br />xiii. Street grades shown. <br />xiv. Provide phasing plan for site grading. <br />xv. All soil erosion and sediment control measures to be incorporated during <br />and after construction must be shown. Locations and standard detail plates <br />for each measure must be included on the plan using Lake Elmo City <br />standard details. Plan must meet the requirements of MPCA General <br />Permit Construction Activity. <br />xvi. All revegetation measures proposed for the tract, including seed and <br />mulch types and application rates must be included on the plan. <br />xvii. Existing contours at two (2) foot intervals shown as dashed lines (may be <br />prepared by a Minnesota licensed surveyor). Existing contours shall <br />extend one hundred fifty (150) feet outside of the tract. <br />xviii. Proposed grade elevations at two (2) foot intervals shown as solid lines. <br />xix. Other information as required and outlined in the City Plan Sheet Format <br />Requirements. <br />(7)(9) Final utility plan, appropriately labeled, prepared and signed by a <br />Minnesota licensed engineer, depicting the following: <br />i. Easements locations, dimensions, and purposes. <br />ii. Underground and overhead facilities. <br />iii. Proposed utility plans including sanitary sewer, watermain, and storm <br />sewer, all in accordance with the City Engineer Design Standards Manual. <br />(8)(10) Final street and storm sewer plan, appropriately labeled, prepared and <br />signed by a Minnesota licensed engineer, depicting the following information: <br />i. Layout of proposed streets showing the proposed lot lines, right-of-way <br />widths, and proposed street names, in accordance with the City’s Street <br />Naming Policy, as outlined in 153.09 (11) (a). <br />ii. Locations and widths of proposed streets, alleys and pedestrian-ways. <br />iii. Location, dimensions and purpose of all easements. <br />iv. Annotation of street geometrics for all horizontal curves, tangent lengths <br />and corner radii. <br />v. Centerline profile and gradients for all streets, with vertical geometrics <br />annotated on the plan profiles. <br />vi. Typical cross section of proposed street improvements. <br />vii. Minimum front and side street building setback lines. <br />viii. When lots are located on a curve, the width of the lot at the building <br />setback line.