Laserfiche WebLink
1 1 6�32 1 40'164 <br />3. Window signs. <br />a) Location. All window signs must be located inside an exterior window unless the sign is <br />weatherproof and does not pose a danger from falling or being blown by the wind. Lettering <br />or graphic elements that are directly mounted on a window shall not encroach upon the <br />frame, mullions, or other supporting features of the glass. <br />b) Permanent signs. When a sign is painted on or otherwise attached or applied to the window <br />area in a permanent manner, then such a sign shall be included in the total allowable wall <br />sign area for the building and shall not exceed 20 percent of the total ground -floor window <br />area of the building, excluding the door windows. All permanent window signs which have <br />their lettering or graphic elements directly on the glazing shall be painted, metal leafed, <br />vinyl transferred, or in some other manner permanently applied to the interior side of the <br />glass of an exterior building window or door. No application using a temporary adhesive <br />shall be permitted unless the planning director determines the <br />application to be reasonably safe. <br />c) Temporary signs. Temporary window Ssigns ng�a e^�-n .d�Pe�a��s shall not <br />exceed 30 percent of the total ground -floor window area of any building, excluding the <br />door windows. Such signs must be displayed in conformance with the temporary sign <br />regulations listed in paragraph subseetkm 0) of this section. <br />d) Limitation. Under no circumstances shall any combination of permanent or temporary <br />window signage cover more than 50 percent of the total ground floor window area of any <br />building. <br />4. Changeable copy signs. <br />