Laserfiche WebLink
SUMMARY AND RECOMMENDATIONS <br /> The study and report that proceeded these recommendations provides detailed <br /> information on design and construction parameters for the St. Anthony Blvd. project. <br /> The roadway is to be constructed in a physically limited area with regard to the width <br /> of the roadway. The MSA minimum street width of 36 feet from face-to-face curb has <br /> been revised to 32 feet by variance and is recommended using a 30 mile per hour design <br /> speed and 9 ton axle load design for the project. <br /> A 31 inch pavement structure is recommended consisting of 5 inches of asphalt surfacing <br /> and base, 12 inches Class 5 base and 14 inches of Class 3 subbase material. Pavement <br /> structure is to be separated from the moist clay subgrade by geotextile construction <br /> fabric. Subdrainage will be provided at the lower areas to drain the granular part of <br /> the pavement structure to the existing storm water systems. • <br /> The estimated cost of the project is $427,000 to be funded using MSA dollars. No <br /> assessments are planned for the project. Some form of advanced funding, as outlined in <br /> the funding section of this report, will be required due to the lack of sufficient funds <br /> for the project in the City's MSA account. <br /> Street lighting cross conduits will be placed in the street to allow street lighting in the <br /> future, if desired. The estimated cost of street lighting is $35,000 to $80,000 depending <br /> on the type of fixtures selected. Based on discussion with your City Manager and Public <br /> Works Director, we did not include street lighting in the project as MSA funding is not <br /> available. <br /> -9- <br />